Select the FTP check box to send a video file to the details configured in Procedure 7-9
7
Configure FTP Server Settings.
Note
1
AVI clips can only be sent via FTP if a microSD card has been installed and FTP has been
selected. If FTP is not selected the AVI clip will be saved to the microSD card and it will have to
be removed from the camera to view the video file. Refer to Removing the MicroSD Card.
2 The selected pre and post event duration buffer will be included in any video clips sent via FTP.
Select the Data Format by selecting the radio buttons:
a
•Video(AVI) - a playable movie containing MJPEG video.
•Audio/Video (AVI) - a playable movie containing MJPEG video and
G711 audio.
Refer to Configuring the Web Video Stream to modify the video
settings.
Select the Pre Event duration in seconds from the drop-down menu. Values range
b
from 0 to 10.
The default setting is 5 seconds.
The exported video will include
c
Select the Post Event duration in seconds from the drop-down menu. Values range
d
from 0 to 10.
The default setting is 5 seconds.
Select Apply to save the alarm settings.
8
Enabling or Disabling an Alarm
Set an alarm to enable or disable.
Procedure 5-6 Enable/Disable an Alarm
Step
Action
Select Alarm from the Programs menu.
1
The Alarm Summary tab displays.
Select the Enabled check box to enable the corresponding alarm.
2
Or
Deselect the Enabled check box to disable the corresponding alarm.
- End -
- End -
Programs Menu
5
5-47