View Menu
Presets
A Preset is a pre-positioned camera scene that you program for cameras installed with pan/tilt and
motorized lens capability. Up to 96 presets can be programmed for the dome.
Adding a new Preset
Create a new preset position on the dome.
Procedure 4-16 Add a Preset
Step
Action
Select Presets from the View menu.
1
The Preset tab displays.
Select
2
The live video pane will display the current camera view.
Adjust the camera view as required.
3
• Pan, Tilt and Zoom.
• Focus Mode and Iris Mode.
Refer to GUI Camera Controls to make the required adjustments.
The following camera controls can be modified and saved as part of the preset and
4
accessed via the Picture Settings menu:
• White Balance
• Picture Balance
• Wide Dynamic Range (WDR)
• IR/DayNight
• Shutter Limit
In a numbered slot on the preset table, select
5
Enter the preset name in the Preset Name text box.
6
Select Add to save the preset.
7
Or
Select Cancel.
Viewing a Preset
View an existing preset position.
4-30
to start the live web video.
to add the new preset.
- End -
Configuration and User Guide