Activating A Scan - American Dynamics ADCI625-P221 Configuration And User's Manual

View Menu
The scan limits will default to Left: 0 and Right: 359.

Activating a Scan

Activate a scan on the dome, this will run using the scan limits saved in Setting Scan Limits.
Procedure 4-29 Activate a Scan
Step Action
Refer to Setting Scan Limits before activating a scan.
1
Select Scans from the View menu.
2
The Scans tab displays.
Select
3
The live video pane will display the current camera view.
Select
4
• smooth - slowly pans between the left and right scan limits, starting at the left
scan limit. When the right scan limit is reached, the scan reverses
• stepped - pans slowly, pausing briefly every 10° between the left and right scan
limits. Once the right scan limit is reached, the scan reverses.
• random - pans randomly between the left and right scan limits. For example, the
scan may start at 10°, then pan right 40° and pause, pan right 20° and pause,
pan left 30° and pause, and pan right until it reaches the right scan limit.
The live video pane will update to display the selected scan.The scan will run continuously
5
until interrupted by a camera command, pattern, preset or alarm.
4-40
to start the live web video feed.
to activate the corresponding scan.
- End -
- End -
Configuration and User Guide