Scans; Setting Scan Limits; Set Scan Limits To Default Settings - American Dynamics ADCI625-P221 Configuration And User's Manual

Scans

A scan allows you to program left and right scan limits to automate surveillance activities. Once
these scan limits are programmed you can choose to run a smooth scan, stepped scan, or random
scan. When active, the scan repeats until interrupted by a camera command, preset, pattern or
alarm.

Setting Scan Limits

Set left and right scan limits on the dome.
Procedure 4-27 Set Scan Limits
Step Action
Select Scans from the View menu.
1
Select the Scan Limits tab.
2
The Scans Limits tab displays.
Select
3
The live video pane will display the current camera view.
Adjust the camera view as required to locate the left scan limit.
4
Refer to GUI Camera Controls to make the necessary adjustments.
Select Set Left to set the displayed position as the left limit.
5
Adjust the camera view as required to locate the right scan limit.
6
Select Set Right to set the displayed position as the right limit.
7
The scan limits have been set and the selected scan will now run within the scan limits set.

Set Scan Limits to Default Settings

Return the dome to the default scan settings.
Procedure 4-28 Set Scan Limits to Default Settings
Step Action
Select Scans from the View menu.
1
Select the Scan Limits tab.
2
The Scans Limits tab displays.
Select Defaults.
3
to start the live web video feed.
- End -
View Menu
4
4-39