Patterns; Adding A Pattern - American Dynamics ADCI625-P221 Configuration And User's Manual

Patterns

A pattern is a series of pan, tilt, zoom and focus movements which can be saved to the dome. A
maximum of 17 patterns can be programmed for the dome with an unlimited duration.
Note
1 The Illustra 625 PTZ provides Apple Peel, which is a predefined pattern stored on the camera
by default that covers the entire viewing area. This pattern slowly pans 360° starting at the
ceiling line. It then tilts 30° and pans 360° again, repeating until the entire viewing area is
covered. The pattern will repeat continuously until interrupted by a camera command, preset,
scan or alarm.
2 There are two Apple Peel patterns on the dome by default. Apple Peel pattern one is read only
and cannot be edited or deleted. Apple Peel pattern two can be edited and if necessary
deleted from the dome.

Adding a Pattern

Create a new pattern.
Note
A 15 minute time out period is implemented when adding a pattern. If no command is received
within the time out period the Add a Pattern procedure will automatically terminate.
Procedure 4-20 Add a Pattern
Step Action
Select Patterns from the View menu.
1
Select the Record tab.
2
The Record tab displays.
Select
3
The live video pane will display the current camera view.
Enter the pattern name in the Pattern Name text box.
4
Select Start.
5
The Record page will update with an Add and Cancel button.
Use the GUI Camera Controls to configure the required pattern settings.
6
The following controls can be saved as part of the pattern:
• Focus
• Iris
Select Add to save the pattern.
7
Or
to start the live web video feed.
View Menu
4
4-33