View Menu
White Balance
White balance (the ability to keep whites looking white) is normally compensated for automatically
via the default Auto White Balance (AWB) setting. Manual White Balance (MWB) is available when
specific color temperature settings want to be set and preserved. This can be done using the red
and blue slider adjustments set for optimal viewing.
Configuring White Balance
Adjust the white balance.
Procedure 4-1 Configure Auto White Balance
Step
Action
Select Picture Settings from the View menu.
1
The White Balance tab displays.
Select the Auto White Balance check box to enable auto white balance.
2
Or
Deselect the Auto White Balance check box to disable auto white balance and enable
Manual White Balance. Manual White Balance can be adjusted using the red and blue
sliders. Refer to Procedure 4-2 Configure the Red and Blue Balance.
The default setting is Auto White Balance 'enabled'.
Configuring the Red and Blue Balance
Adjust the red and blue balance.
Procedure 4-2 Configure the Red and Blue Balance
Step
Action
Select Picture Settings from the View menu.
1
The White Balance tab displays.
Select
2
The live video pane will display the current camera view.
Deselect the Auto White Balance check box to disable auto white balance.
3
Note
When Automatic White Balance is first switched from enabled to disabled, the red
and blue values displayed are based on the current feedback values from the
camera.
4-20
to start the live web video.
- End -
Configuration and User Guide