Home; Setting A Home Position; Removing The Home Position - American Dynamics ADCI625-P221 Configuration And User's Manual

Camera Configuration Menu

Home

The home position is a preset, pattern or scan/sequence that automatically runs after a designated
period of dome inactivity. Use this option if you want to keep a specific area under surveillance
when the dome is not moving.

Setting a Home Position

Use a home position on the dome.
Procedure 6-17 Configure the Home Position
Step Action
Select Home from the Camera Configuration menu.
1
The Home Position tab displays.
Select the Home Position Type:
2
• Preset
• Pattern
• Sequence
• Scan
• None
If an action is selected chose the type of action to perform from the Parameter drop-down
menu.
Use the slider bar to select the Return Time (mins).
3
Select Apply to save the settings.
4

Removing the Home Position

Remove the current home position.
Procedure 6-18 Clear the Home Position
Step Action
Select Home from the Camera Configuration menu.
1
The Home Position tab displays.
Select the None from Home Position Type.
2
Select Apply to save the settings.
3
6-74
- End -
- End -
Configuration and User Guide