Areas; Programming An Area; Editing An Area - American Dynamics ADCI625-P221 Configuration And User's Manual

Programs Menu

Areas

Areas allow sections within the field of view to be labeled. These labels may then be turned on
within the Overlay Settings option. Areas may not overlap. The zoom level affects the size areas
may appear.
You may program up to 16 areas on the dome.

Programming an Area

Set an area on the dome.
Procedure 5-17 Program an Area
Step Action
Select Areas from the Programs menu.
1
The Areas tab displays.
Select
2
The live video pane will display the current camera view.
In a numbered slot on the areas table, select
3
Enter the area name in the Name text box.
4
Adjust the camera view as required to locate the left boundary.
5
Refer to GUI Camera Controls to make the necessary adjustments.
Select Set in the Left column to set the displayed position as the left boundary.
6
Note
This must not be less than the right boundary of the previous area.
Adjust the camera view as required to locate the right boundary.
7
Select Set in the Right column to set the displayed position as the right boundary.
8
Note
This must not be greater than the next area's left boundary.
Select Add to save the area.
9
Or
Select Cancel.

Editing an Area

Edit the details for an existing area on the dome.
5-56
to start the live web video feed.
to add the new area.
- End -
Configuration and User Guide