Problem Solving Guide - Miele DG 6301 Operating And Installation Instructions

Hide thumbs Also See for DG 6301:
Table of Contents

Advertisement

With the aid of the following guide, minor problems can be diagnosed and easily
corrected without contacting Miele. This will save you time and money because
you won't need to book a service technician.
Please note that a call-out fee will be applied to unnecessary service visits where
the problem could have been rectified as described in these operating
instructions. Please note:
,
Repairs to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and
national safety regulations. Repairs and other work by unqualified persons
could be dangerous. Miele cannot be held liable for unauthorised work.
Problem
You cannot switch
the appliance on.
The appliance will
not heat up if the
Demo mode has
been set.
Possible cause and remedy
The fuse is defective or has tripped.
^ Reset or replace the fuse.
There may be a technical fault.
^ Disconnect the appliance from the mains connection for
approx. 1 minute:
– switch off at the wall socket, or switch off the safety fuse,
or
– switch off the fault-current circuit breaker.
Reset the trip switch in the mains fuse box, and switch the
appliance back on. If the appliance still will not switch on,
contact a qualified electrician or Miele.
^ Switch off the Demo mode. Follow the instructions in the
display.

Problem solving guide

97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg 6401

Table of Contents