Ethernet Status Leds (Lanled1, Lanled2); Ethernet Lan Interfaces (Lan1, Lan2) - Diamond Systems PLT-T56N-4G User Manual

4.7 Ethernet Status LEDs (LANLED1, LANLED2)

Connectors LANLED1 and LANLED2 provide signals for adding optional LAN status LEDs to Pluto's two
10/100Mbps Ethernet ports. LANLED2 supports the Ethernet controller located on the Pluto Baseboard, while
LANLED1 supports ETX CPU module's controller. Both connectors have identical pinouts.

4.8 Ethernet LAN Interfaces (LAN1, LAN2)

Connectors LAN1 and LAN2 carry the data signals from Pluto's two 10/100Mbps Ethernet interfaces. LAN1 is
associated with the Ethernet controller located on the ETX CPU module, while LAN2 provides the interface to an
Realtek 8103EL controller located on the Pluto Baseboard. Connectors LANLED1 and LANLED2 may optionally
be used for adding LAN status LEDs to either or both Ethernet ports. Connectors LAN1 and LAN2 have identical
pinouts.
Pluto User Manual A4
Activity LED- 1 2
Link LED- 3 4
TX+ 1 2
RX+ 3 4
(unused) 5 6
(unused) 7 8
GND 9 10
www.diamondsystems.com
Activity LED+
Link LED+
TX-
(unused)
RX-
(unused)
Key
Page
23