Irc-6 (Infrared Remote Control 6) - Chauvet Wedge Tri User Manual

Hide thumbs Also See for Wedge Tri:
Table of Contents

Advertisement

IRC-6 (Infrared Remote Control 6) Operation
Note: Make sure to point the IRC-6 directly at the receiver on the product.
Page 16 of 20
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.
Press <AUTO> on the IRC-6.
2.
Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1.
Press <SPEED> on the IRC-6.
2.
Press <%>.
3.
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press <SOUND> on the IRC-6.
To adjust sound sensitivity in Sound-Active mode:
1.
Press <SENSITIVITY> on the IRC-6.
2.
Press <%>.
3.
Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1.
Press <MANUAL> on the IRC-6.
2.
Press any number between <0> and <9> to choose your color.
To manually control the RGBWA+UV percentage:
1.
Press <MANUAL> on the IRC-6.
2.
Press <R>, <G>, or <B> (red, green, or blue) to choose your color.
Note: The Wedge™ Tri only contains red, green, and blue LEDs. The
white, amber, and UV color options on the IRC-6 will only operate with
fixtures capable of outputting these color lights.
3.
Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1.
Press <STROBE> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the strobe rate.
3.
Press <STROBE> again to turn off the strobe.
To fade the light output:
·
Press <FADE> on the IRC-6.
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the
button is pressed again.
Note: The IRC-6 will not respond to any inputs when the Black Out mode
is activated. If the remote does not respond when a button is pressed, try
pressing <BLACK OUT>. You may have inadvertently activated the
Black Out mode.
Wedge™ Tri User Manual Rev. 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents