Mounting; Orientation; Rigging - Chauvet Wedge Tri User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 10 of 20
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The Wedge™ Tri may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The Wedge™ Tri has 3 threaded mounting holes which
are appropriate for this purpose (two size M12 holes and one size M10 hole).
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Secure the safety cable using the
passageway on the back of the product
Mounting Clamp
(such as CLP-15 or CLP-15N
clamp from CHAUVET® works
with M12 hole)
Rubber Feet
M12 Threaded
Mounting Holes
Technical
Safety Cable
for floor
mounting
Specifications).
M10 Threaded
Mounting Hole
Mounting Clamp
(such as the CLP-10 or
CLP-35HC clamp from
CHAUVET® works with
M10 hole)
Wedge™ Tri User Manual Rev. 3