FRESH WATER SYSTEM
Never run the water system if the valve is closed
or the tank is empty to avoid damaging the electrical equipment.
Check the water filter for condition as instructed in the manufacter 's manual.
GAS SYSTEM
Refit the cap in place on the pressure reduction valve screwed section to avoid corrosion,
when changing the cylinder.
Change the hose on schedule.
Don't forget to shut off the gas safety valve and pressure reducing valve when
P R E C A
U T I O N
P R E C A
U T I O N
(Refer to Chapter 2 « Safety»)
RECOMMENDATIONS
the heater is not in use.
index 1
7
39
58