Shore Power Cable; Mast Harness Connection; Electronics - Jeanneau Sun Odyssey 40 User Manual

SHORE POWER CABLE

Never let the end of the shore power cable hang in the water. It may entail an electric
field liable to hurt or kill people swimming close by.
In order to reduce the risks of electric shock and fire :
. Switch off the electric panel connected to the shore power plug on
shore before you connect or disconnect the shore power cable
. Connect the shore power cable in the boat before you plug it in the
power point on shore.
. Disconnect the shore power cable first on shore side then close tigh-
ly the power point on shore.
. Do not change the connections of the shore power cable

MAST HARNESS CONNECTION

Connect the harness after installation of the mast.
Access to the harness can be gained through the pillar boxing in the forward cabin, after
inserting them in the cables outlets in front of the mast step.

ELECTRONICS

Special sleeves are available to complement the boat's equipment (refer to drawing).
Never install electronic instruments or repeaters less than 1.50m away from the radio
loudspeakers.
D A N G E R
D A N G E R
P R E C A U T I O N
P R E C A U T I O N
index 1
8
45
58