Outback EX200T Assembly And Operating Instructions Manual page 9

5
Excel 200
C16
Insert the Axle (C20) through the clamping brackets underneath
the Gas Bottle Holder (C16) and tighten the clamping screws.
Take care not to over tighten these screws which will damage the
plastic gas bottle holder.
Slide a Wheel Spacer (C18) over each end of the Axle (C20).
Note: the spacers are packed in a plastic bag with the main
electrode, grease cup holder and grease cup.
6
Excel 200
Carefully turn the completed trolley over, right
side up.
Excel 300
C20
Excel 300
9
C19
C18
D7
Slide the Wheels (C19) over
each end of the axle. Secure
the wheels into place with the
M8 Locknuts (D7).
B13
D1
Attach the Body Support (B13) to the legs
using M6x15 Bolts (D1).
√
×