Outback EX200T Assembly And Operating Instructions Manual page 7

Assembly
IMPORTANT!
TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
•
adjustable spanner or metric spanner set.
The assembly of this barbecue requires 2 people.
•
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
•
case sharp edges are present.
Please read the Important Information section carefully before assembly and use of your
•
barbecue.
1
Excel 200
C17
2
Excel 200
Excel 300
C14
C14
Excel 300
C12
C16
Attach the Right Front Leg
(C13) and Right Rear Leg
(C14) to the Leg End Loop
(C17). The legs are a push
fit onto the leg end loop. In
case of difficulty, they may
need tapping with a soft
faced mallet. Take care not
C13 to damage the parts.
Attach the Left Front Leg
(C11) and Left Rear Leg
(C12) to the Gas Bottle
Holder
ST4.0x10 Screws(D4).
C11
7
(C16) using