Outback EX200T Assembly And Operating Instructions Manual page 15

17
Excel 200
Slide a Shelf Spacer (D9) onto a M6x15 Bolt (D1) and screw it into the upper fixing point on
the rear legs as shown. Repeat for the front leg. Attach the assembled Side Shelf (C2) to the
right hand side of the barbecue by sliding a Shelf Spacer (D9) onto a M6x15 Bolt (D1) and
fitting the shelf to the lower fixing point on the rear leg as shown. Repeat for the front leg.
Hook the shelf onto the upper pins to extend it to its normal horizontal position.
18
Excel 200
Excel 300 users, skip this step and proceed directly to step 19.
D1
D9
Slide a Shelf Spacer (D9) onto a M6x15 Bolt (D1) and screw it into the upper fixing point on the rear
legs as shown. Repeat for the front leg. Attach the previously assembled Side Shelf (C1) to the left
hand side of the barbecue by sliding a Shelf Spacer (D9) onto a M6x15 Bolt (D1) and fitting the shelf to
the lower fixing point on the rear leg as shown. Repeat for the front leg.
Hook the shelf onto the upper pins to extend it to its normal horizontal position.
Excel 300
D1
D9
Excel 300
15
D1
D9
D1
D9
C1