Yamaha ACD1 Service Manual page 33

1-2. Personal computer setting
q Download the ACD1 test program data package from the YSISS homepage.
URL>> http://plaza.yamaha.co.jp/ysiss/exindex.nsf
The following is ACD1 test program data package composition.
ACD1 Data
(Tera Term Pro)
Tool
AutoConnect.bat
w Copying ACD1 test program data package
Copy the downloaded ACD1 test program data package to just under the C drive.
e Installing the Terminal software
Install the Tera Term Pro.
Don't change the installation destination "C:¥PROGRAM FILES¥TTERMPRO" to any other area.
r Network setting
([Control panel] → [Network connection] → [Local area connection] → [Property] → [Internet Protocol (TCP/IP)] →
[Property])
Tick the "Use the following IP address"
IP address:
Subnet mask:
Default gateway:
Tick the "Use the following DNS server addresses"
Preferred DNS server:
Alternate DNS server:
Select "OK" after the above setup is completed to change the IP address.
* Do not connect to an in-offi ce LAN or Internet.
*1 "100" or any other value except 0, 2 or 255 can be assigned for the fourth
octet of the IP address.
*2 There is no problem if the default gateway is activated.
boot
cpt
prog
boot
group
prog
SerialDebugger
sync
192 168 0 100
255 255 255 0
*2
blank
blank
blank
*1
[TCP/IP property setup]
ACD1
33