Yamaha ACD1 Service Manual page 72

Amplifier control device
Hide thumbs Also See for ACD1:
Table of Contents

Advertisement

ACD1
8.
Confi rming the writing
The following procedure allows version check only.
• Click on the [Confi rm] button.
• If "V*.** or R*.**" is shown for the group version, the writing is fi nished successfully. Check that the version is identical to the
group version. [Time required to indicate the completion message: about 12 seconds]
The "V*.** or R*.**" shows the group version, as "V1.10" in the [Example of Writing confi rmation completion screen] in the
fi gure below. If "Error!!" is shown, it indicates that the boot/program/component data is not written successfully. In that case,write
the data again.
9.
After confi rming the writing
Restarting will not take place automatically after writing data unlike boot/program updating. Turn off the power manually and then
restart if you want to start in the normal mode.
72
[Example of Writing Confi rmation Completion Screen]

Advertisement

Table of Contents
loading

Table of Contents