Yamaha ACD1 Service Manual page 78

ACD1
6. エラーメッセージが出たときの処理
以下のようなエラーメッセージが表示された場合は、 アップデートソフトを一旦終了し、 ACD1 を再起動した上で、 アッ
プデートを最初からやり直してください。
アップデートソフトおよび ACD1 再起動後も同じメッセージが続く場合は、PC を再起動し、ACD1 も再起動した上で、
アップデートソフトを起動し、アップデートを最初からやり直してください。
○エラーメッセージ一覧
[ERROR:001] Command transmission was failed. (Securement of communication pathway)
[ERROR:002] Command transmission was failed. (Acquisition of communication control authority)
[ERROR:003] Command transmission was failed. (Control authority open)
[ERROR:004] Command transmission was failed.(Disconnection of communication pathway)
[ERROR:005] Communication pathway couldn't be secured.
[ERROR:006] Control authority couldn't be obtained.
[ERROR:101] Command transmission was failed. (Update changeover)
[ERROR:102] Command transmission was failed. (File writing)
[ERROR:103] Command transmission was failed. (Restart order)
[ERROR:104] Command transmission was failed. (Version acquisition)
[ERROR:105] Command transmission was failed. (Acquisition of device name)
[ERROR:106] Update changeover was failed.
[ERROR:107] File writing was failed.
[ERROR:108] Version acquisition was failed.
[ERROR:109] Obtaining device name was failed.
[ERROR:110] The command is wrong.
[ERROR:111] Data fi le not found..
78