Assembly - Outback Society/Granite Assembly And Operating Instructions Manual

Assembly

IMPORTANT!
•
Tools Required: Medium size flat blade or Phillips/Crosspoint screwdriver, adjustable spanner or metric
spanner set
•
The assembly of this barbecue requires 2 people.
•
Carefully unpack the trolley box and remove all internal packaging before commencing assembly.
•
Carefully remove the box lid from the body box and remove all internal packaging and parts inside the body.
•
The inlet connection of the gas rail assembly on the BBQ body is lower than the body. You must never allow
the pipe to rest on the ground during assembly as serious damage could result. We recommend the body is
left sitting in the box until required for assembly to trolley.
•
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case
sharp edges are present.
1
Attach the Rear Right Leg (C11) to the Trolley Foot (C15). The legs are a push fit onto the trolley foot and
on the gas bottle holder. In case of difficulty, they may need tapping lightly with a soft face mallet. Take care
not to damage parts.
2
Attach the Front Right Leg (C10) to the Trolley Foot (C15)
5