Advertisement
Assembly and Operating Instructions for Outback®
Mayfair/Tungsten, Spirit/Titanium, Hooded Gas Barbecues
Photographs are not to scale.
Specifications subject to change
without prior notice.
•
•
•
•
•
•
WARNING
•
•
•
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
Elite Series Barbecues
For outdoor use only. Not for commercial use.
Read instructions before using the appliance. Failure to follow instructions
could result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the instructions
may be dangerous and will invalidate your warranty. This does not affect your
statutory rights.
Retain these instructions for future reference.
Leak test annually, and whenever the gas bottle is removed or replaced.
For Flare-up control please refer to the 'OPERATION' section of this manual.
1. Do not store or use petrol or other flammable
2. A gas bottle not connected for use shall not be
FOR YOUR SAFETY
vapours or liquids in the vicinity of this or any
other appliance.
stored in the vicinity of this or any other
appliance.
EN (Europe)
0359
Advertisement
Chapters
Table of Contents
Related Manuals for Outback Mayfair
Summary of Contents for Outback Mayfair
- Page 1 Elite Series Barbecues Assembly and Operating Instructions for Outback® Mayfair/Tungsten, Spirit/Titanium, Hooded Gas Barbecues EN (Europe) Photographs are not to scale. Specifications subject to change 0359 without prior notice. • For outdoor use only. Not for commercial use. • Read instructions before using the appliance. Failure to follow instructions could result in death, serious bodily injury, and/or property loss.
- Page 2 Parts List Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram’. CODE PART Mayfair/Tungsten Spirit/Titanium Hood Handle L/H Hood Handle Bracket R/H Hood Handle Bracket HOOD...
- Page 3 Parts Diagrams Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram.’...
- Page 4 Hardware Reference Diagram Specifications subject to change without prior notice. D2 (screw) D3(washer)
- Page 5 Assembly IMPORTANT! • Tools Required: Medium size flat blade or Phillips/Crosspoint screwdriver, adjustable spanner or metric spanner set • The assembly of this barbecue requires 2 people. • Carefully unpack the trolley box and remove all internal packaging before commencing assembly. •...
- Page 6 Attach the Bottom Slat Assembly (C12) to the Base Tray (C13) using the Screws (D2). Attach the leg assembly to the Base Tray (C13) using the Screws (D2).
- Page 7 Threaded Insert Attach the Front Left Leg (C8) and Rear Left Leg (C9) to the Gas Bottle Holder (C14). Note: Threaded inserts must be facing in the direction shown! Align the Gas Bottle Holder (C14) with the Slat Assembly (C12).
- Page 8 Attach the Gas Bottle Holder (C14) to the Bottom Slat Assembly (C12) using the Screws (D2) and Washers (D3). Insert the Axle (C19) into the Gas Bottle Holder (C14).
-
Page 9: Barbecue Body
Place the Wheels (C17) onto the Axle (C19) and secure with Locknuts (C18). Carefully turn the completed trolley over, right side up. Remove all cast iron cooking components, Flame Tamer/ Lava Rock , drip tray, and any internal packaging from the barbecue body. Note: Loosen off the bolts and move the brackets down to their lowest position. - Page 10 CAUTION! Care must be taken to ensure hood does not fall open unexpectedly or that the hood surface is damaged when set on the ground. Attach the R/H Side Shelf (C6) to the Barbecue Body (B1) using the Screws (D2). Attach the Front Left Endcap (C3) to the Body (B1) using the Screws (D2).
- Page 11 Attach the Rear Left Endcap (C4) to the Body (B1) using the Screws (D2). CAUTION! Care must be taken to ensure hood does not fall open unexpectedly. Carefully turn the Barbecue Body (B1) over right-side-up.
- Page 12 Carefully lay the Barbecue Body (B1) onto the tops of the legs. The tops of the legs should slot into the endcaps. When done correctly, the barbecue should be able to stand on its own weight. WARNING: DO NOT RELEASE THE BARBECUE BODY WHILE THE BARBECUE HAS NOT BEEN PROPERLY SEATED.
- Page 13 Attach the Side Shelf Shield (C2) to the endcaps using the Countersunk Screws (D1). Attach the Side Shelf Hook (C22) to the L/H Side Shelf (C1) using the Screws (D5), Hook the side shelf to the endcaps.
- Page 14 Lay the Utensil Trays (C5) into their positions on either side of the barbecue body. Place the Wheel Hubcaps (C16) onto the sides of the Wheels (C17).
- Page 15 Slide the loops of the Gas Bottle Strap (21) onto the Retaining Rod (C20). Secure the Rod (C20) to the trolley legs using the Screws (D2). Slide the Drip Tray (B5) into place underneath the barbecue body.
-
Page 16: Burner 2
Lay the Flame Tamer/Lava Rock (B5) into the body ensuring it lies level within the body. Lay the Grills (B6, B7) and Griddle (B8) into place. 2 burner model configuration: Left — Large Cooking Grill, Right — Small Cooking Grill, 3 burner model configuration: Left —... - Page 17 Leak Test Diagram Assembly is now complete. All joints and connections must now be leak tested before using the barbecue. For details of leak testing, please refer to instructions on pages 19 / 20.
- Page 18 ESSENTIAL INFORMATION Please read instructions before using your barbecue. BEFORE YOU USE YOUR BARBECUE (also see installation) • Perform a leak test. This is the only safe and sure way to detect any gas leaking from joints and connections of the barbecue after assembly. Follow the leak test instructions on page 19. Check that the gas hose is free of any tension, twisting, cuts, or cracks.
-
Page 19: Control Panel
Cover the burners with foil to keep the burner holes free from insects or other debris. • If you intend to leave your barbecue outside make sure it is protected from the elements by a heavy duty cover, these are available from most Outback® stockists. IMPORTANT INFORMATION •... - Page 20 • Repeat test • If bubbles form again do not use the barbecue and contact your local Outback distributor for assistance. OPERATION Your barbecue is not designed to be used with more than 50% of the cooking area as a solid plate –...
-
Page 21: Drip Tray
Confirm that each burner is lit before turning on the next burner • If the right hand burner fails to light, turn off the gas and contact your local Outback dealer. CARE AND MAINTAINANCE Never handle hot parts of the BBQ with unprotected hands. -
Page 22: Utensil Tray
Cleaning Material Where used Cleaning Method Recommended Porcelain Grills Enamel is a thin, glass based coating fused onto metal and enamel Griddles as such needs to be treated with care. Cooking oil, together Hood with fat from food being cooked can turn to carbon as a re- sult of heating and result in black flakes coming away from the cooking surfaces. -
Page 23: Troubleshooting
Troubleshooting Problem Possible Cause Solution Burners will not LP gas bottle is empty Replace with full gas bottle light using the Faulty regulator Have regulator checked or replaced ignition system Obstructions in burners Clean burners Obstructions in gas jets Clean jets and gas hose or gas hose Electrode wire is loose or Reconnect wire... -
Page 24: Technical Specifications
Technical Specifications Injector Model Name Heat Input Burners Gas /Pressure Approval Size Butane/ 28mbar Outback® Propane/ 37mbar 0359 Mayfair / 7.87kW 359AS128 Butane/Propane Tungsten 30mbar 1.04 Butane/Propane Outback® 50mbar 0359 Spirit / 11.8kW 359AS128 Titanium Butane/Propane 36mbar Countries of Use:...