Troubleshooting - Outback Society/Granite Assembly And Operating Instructions Manual

Troubleshooting

Problem
Burners will not light
using the ignition system
Burner will not light
with a match
Low flame or flashback (fire
In burner tube - a hissing or
roarIng noise may be heard)
Gas valve knob difficult
to turn
Possible Cause
LP gas bottle is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets
or gas hose
Electrode wire is loose or
disconnected on electrode
or ignition unit
Electrode or wire is damaged
Faulty integral igniter
Incorrect electrode gap/
Bent collector box
LP gas bottle is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets
or gas hose
LP gas bottle too small
Obstructions in burners
Obstructions in gas jets
or gas hose
Windy conditions
Integral ignition system jammed
Gas valve jammed
23
Solution
Replace with full gas bottle
Have regulator checked or replace
Clean burners
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Replace gas valve complete
with integral igniter
The gas collector box around the
electrode eeds to be in line with the
burner with a gap of 3 to 4mm
between the end of the electrode
and the tag on the end of the
collector box. Realign the collector
box as required.
Replace with full gas bottle
Have regulator checked or replace
Clean burners
Clean jets and gas hose
Use larger gas bottle
Clean burners
Clean jets and gas hose
Use BBQ in a more sheltered
position
Replace gas valve complete
with integral igniter