Calling From The Contact List (2-Party Conference) - Panasonic KX-VC1300 User Manual

Starting a Video Conference

Calling from the Contact List (2-party Conference)

Note
•
To make a video conference call from the contact list, you must first register contacts in the contact list
(Page 94).
•
If "IP Address (LAN 1)" (setting) is set to "Auto" on the network settings screen (Page 106), or if
"IPv6 Address (LAN 1)" (setting) is set to "Auto (SLAAC)" or "Auto (DHCP)" (Page 107), the
unit's IP address will be automatically obtained, and therefore may change to a different IP address
from the one registered in the other party's contact list. In such cases, when the other party tries to call
you by selecting a registered IP address from their contact list, the call will not be connected. For details,
contact your network administrator.
1 Press [MENU].
•
The Menu screen is displayed.
2
Select "Contact List" using [
[ENTER].
•
The contact list screen is displayed. The entries are
grouped in the index tabs and displayed in
alphabetical order of "Site".
Note
•
If you press [Y], entries are displayed in the
speed dial number order.
48 User Manual
][ ] and press
1
2, 3
4
Document Version 2015-12
5