Displaying Unit Information - Panasonic KX-VC300 User Manual

Displaying Unit Information

1 Press [Status] twice.
•
The unit information screen is displayed.
Note
•
When you are not using a SIP server, "SIP
Username" and "SIP Domain Name" will be blank.
•
The status of communication encryption is displayed
under "Encryption" and the resolution for sending
images is displayed under "Resolution (send)".
This information is not displayed when
communication is not occurring.
•
When you are not on the video conference call and
both "SIP" and "H.323" are set to
"ON" (Page 109), you can switch the unit
information screen between SIP and H.323 by
pressing [G].
•
If [Status] is pressed twice during a video
conference call, you can press [R] to switch to the
next screen. That screen displays the unit name, IP
address/SIP URI (or SIP user name)/MCU's
conference room number@IP address/MCU's SIP
user name@IP address/H.323 extension/H.323
name, packet loss rate, connection bandwidth,
resolution, frame rate and field frequency for the 3
parties displayed under "Site 1", "Site 2" and "Site
3".
*1*2
*1
"Frequency" is not displayed when using H.323 or
connecting to an MCU or non-Panasonic video conference
system.
*2
Depending on the other party, "Name" may be blank.
•
When using H.323, and "Receive H.239 Call" is set
to "ON" (Page 95), the information for one site
may include the information about multiple received
images.
Displaying the Connection Status
1
User Manual
2
83