Team Losi XXX-NT AD2 Owner's Manual page 17

The washers marked "Do Not Use" in the diagram, have been removed and should not be used under any
STOP!
circumstances. The parts are included in the assembly bags, and can be used in other applications, However, Do Not
use the washers in this application.
Rear Hub Install
Step D-5
1. Clean any dirt or oil off the screw by wipping the threads of the
screw (111) on a rag. This will ensure that the Thread Lock (119) will
stick to the threads of the screw.
2. Remove the #4 Washer (23) marked "Do Not Use" during this
step.
3. Apply Thread Lock to threads at the very end of the screw
farthest away from the head, before installation.
READ THIS FIRST!
119
118
Do Not
115
Use
800-0226
111
Do Not
Use
113