Atlona AT-UHD-SW-52ED User Manual page 12

The EDID Page enables the input preferred timing to be selected and HDCP compliance reporting
to be set.
Note: To ensure compatibility, it is best to set the EDID to match the native resolution of the connected display and the
audio format of the connected sound system
Note: To use the analog audio output, a 2Ch EDID will need to be selected
Internal EDIDs -
STD Sink (pass through)
Int_3
1080P DD
Int_6
1080P 3D DD
Int_9
1280x800 2Ch
Int_12
1280x800 DVI
Note: Internal EDIDs include audio EDIDs as well. 2Ch is two channel audio, MCh is multi-channel audio (including up
to Dolby TrueHD or DTS-HD Master Audio), DD is Dolby Digital, and DVI does not include audio.
HDCP selection allows the HDCP reporting of the input to be changed between compliant and
non-compliant
Note: This function is controllable through RS-232 and TCP/IP.
Note: UHD-SW-52ED protects HDCP encoded content and will not pass HDCP content to a non-HDCP compliant
device.
Note: Some devices flag all content as protected when connected to an HDCP compliant display. This prevents what
should be non-protected content from reaching devices (e.g. teleconference system) through the
UHD-SW-52ED.
Note: When HDCP reports as non-compliant, only user created content is transmitted. Protected content from all
sources (e.g. Blu-ray, AppleTV, etc) is blocked.
EDID Saved
Save the current output's EDID to memory. There are eight total EDID memories to save to.
atlona.com
Int_1
1080P 2Ch
Int_4
1080P 3D 2Ch
Int_7
720P 2CH
Int_10
1366x768 2Ch
Int_13 3840x2160 2Ch Int_14
12
Int_2
1080P MCh
Int_5
1080P 3D MCh
Int_8
720P DD
Int_11
1080P DVI
3840x2160 MCh
Toll free: 1-877-536-3976
Local: 1-408-962-0515