Atlona AT-UHD-SW-52ED User Manual

4k/uhd 5 input hdmi switcher with mirrored hdmi and hdbaset outputs and poe
Hide thumbs

Advertisement

Quick Links

4K/UHD 5 Input HDMI Switcher
with Mirrored HDMI and
HDBaseT Outputs and PoE
AT-UHD-SW-52ED
User Manual
Please check http://www.atlona.
com/AT-UHD-SW-52ED
for the most recent firmware
update or manual.
Toll free: 1-877-536-3976
atlona.com
Local: 1-408-962-0515

Advertisement

loading

  Also See for Atlona AT-UHD-SW-52ED

  Related Manuals for Atlona AT-UHD-SW-52ED

  Summary of Contents for Atlona AT-UHD-SW-52ED

  • Page 1 4K/UHD 5 Input HDMI Switcher with Mirrored HDMI and HDBaseT Outputs and PoE AT-UHD-SW-52ED User Manual Please check http://www.atlona. com/AT-UHD-SW-52ED for the most recent firmware update or manual. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 2: Table Of Contents

    ....................20 10. Connection Diagram ....................20 11. Specifications ....................21 12. Safety ....................22 13. Warranty ....................23-24 14. Registration ....................24 Revision B - Firmware 1.1.0 (11/2015) CEC display control added Pg. 13 Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 3: Introduction

    (the second will be in the box with the second unit) mountings plates to affix the two units together inside the rack. Wall/table mounting will use both mounting plates to affix the unit to a table or wall. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 4: Category Cable

    Using the wrong size connectors may result in interference causing loss of signal. Important! “EZ RJ45 connectors” are not recommended with HDBaseT extenders. Doing so may result in interference with audio and video transmission. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 5: Panel Descriptions

    INPUT HDMI 2 HDMI 3 HDMI 4 HDMI 5 VOLUME AT-UHD-SW-52ED AUDIO RS-232 1. HDMI LEDs - Illuminates to indicate the selected source S/PDIF OUT 2. Volume LEDs - Displays the volume level 3. Power Button - Turns switcher on, places the unit in standby mode, or control a connected...
  • Page 6: Captive Screw

    Note: The IR receiver and IR transmitter is optional for the UHD-SW-52ED. The compatible IR receiver (AT-IR-CS-RX) and IR transmitter (AT-IR-CS-TX) can be purchased through atlona.com. The wires of the emitter and receiver have been marked to differentiate the pin outs.
  • Page 7 Important! When terminating cables, please ensure exposed adjacent wires do not touch. This may result in a short that can damage connected devices. BALANCED UNBALANCED Important! With unbalanced connections a jumper is needed between ground and negative to reduce noise Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 8 IP address set using RS-232 commands or the webGUI. WebGUI Atlona has created an easy to use webGUI for initial setup and later changes to the configuration of the switcher. To begin, plug a LAN cable into the LAN port of the UHD-SW-52ED and the network switch, then...
  • Page 9 If your control system supports password protection, you can turn login mode on. The webGUI always requires a password. Note: The username and password used in IP Login Mode will be the same login information as the webGUI. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 10: Audio

    Auto Switch - Turn auto switching on/off. Default is off. Video Settings Source - Select one of the five inputs to be routed to the output. Audio Settings Volume - Adjust output volume up or down Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 11 Note: User information will display for the admin only. Up to 3 users other than admin can be added. Note: Only the admin password can be changed. The username will always remain “root”. If the admin password is lost the system must be returned to factory settings and setup repeated. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 12 Note: When HDCP reports as non-compliant, only user created content is transmitted. Protected content from all sources (e.g. Blu-ray, AppleTV, etc) is blocked. EDID Saved Save the current output’s EDID to memory. There are eight total EDID memories to save to. Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 13 Off - Sends a command over HDBaseT to the HDMI output of the connected receiver to turn the connected display off Note: CEC may not work with every display type Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 14 Control Type - Select whether the display on/off commands are sent using RS-232, TCP/IP, or Feedback Verify On: If receiving no feedback, the product will send the command up to 4 times Off: The command will only be sent once, whether feedback is received or not Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 15: Tcp/Ip

    End of line symbols - None, CR, LF, CR-LF, Space, STX, ETX, Null - Select the appropriate symbol from the drop down list. Carriage return, line feed, and carriage return with line feed are the most commonly used symbols. Note: Be sure to check the display’s manual for the correct symbol Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 16 For the best performance ensure the most current firmware is being used. Atlona frequently updates firmware to add features, improve compatibility, and fix bugs. If any issues are experienced with the switcher, check to make sure the most current firmware is installed.
  • Page 17: Rs-232 & Tcp/Ip

    RS-232 is connected through a 9-pin female D connector. Three pins will have specific functions associated with them, some are unassigned. Function ---- Not used Transmit Receive ---- Not used Ground ---- Not used ---- Not used ---- Not used ---- Not used Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 18 Displays the software versions: ex. VersionMCU E.g. Version OSD E.g. Version x.x.xx firmware [MCU] OSD menu [OSD] DSP [DSP] FPGA [FPGA] Type AT-UHD-SW-52ED Displays the model information Mreset Mreset Reset device to manufacture default Lock Lock Locks the front panel buttons...
  • Page 19: Ip Commands

    IPQuit Logs out of TCP/IP Connection IPAddUser X Y TCP/IP user was added Adds a user for TCP/IP control E.g. IPAddUser Atlona 1234 X= user and Y= Password IPAddUser username password Displays a list of users and passwords username password...
  • Page 20: Baud Rate

    Connection Diagram Video Audio HDMI 1 POWER INPUT HDBaseT HDMI 2 HDMI 3 Control HDMI 4 HDMI 5 VOLUME AT-UHD-SW-52ED AUDIO RS-232 MUTE OFF S/PDIF OUT Control System HDMI IN HDMI OUT HDBaseT OUT DC 48V AT-UHD-EX-100CE POWER AT-UHD-EX-100CE-RX ETHERNET...
  • Page 21: Specifications

    1.73 x 8.75 x 10.28 (inch) Rack Unit 1/2 rack, 1RU Weight Device 3.15 kg 1.44 lbs Certification Power Supply CE, FCC, cULus, RCM Product CE, FCC **4096x2160@50/60Hz & 3840x2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
  • Page 22: Safety

    It may also cause damage to your product. Opening the product will void the warranty. Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or contact Atlona directly.
  • Page 23: Warranty

    Atlona requires that products returned are properly packed, preferably in the original carton, for shipping. Cartons not bearing a return authorization or case number will be refused. Atlona, at its sole discretion, reserves the right to reject any products received without advanced authorization. Authorizations can be requested by calling 1-877-536-3976 (US toll free) or 1-408- 962-0515 (US/international) or via Atlona’s website at www.atlona.com.
  • Page 24: Registration

    Atlona’s authorized distributors, dealers and resellers can be found at www.atlona.com. Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.