Power And Reboot For Icon 800 - LifeSize Icon 800 Installation Manual

Power and Reboot for Icon 800

The power switch on the back of the Icon 800 system controls the main system power. Standby power is
available to the system when the AC power cord is plugged in and when the power switch is turned on.
Turning off the power switch also turns off standby power.
Press and hold the reset button on the front of the system to perform actions such as rebooting the system.
The LED indicators indicate the following conditions:
LED
System Status/Reset
Network Activity/Speed
Indicator
When the reset button is not pressed:
•
Solid blue — The system is idle (no current or scheduled calls).
•
Rapidly blinking blue — The system is in use (call in progress).
•
Slowly blinking blue — Scheduled calls are pending.
•
Solid purple — A system upgrade is in progress.
•
Solid red — A major error occurred.
Solid yellow on a network port indicates a valid link. Flashing yellow indicates both a
valid link and network activity on the port.
On an active port, speed is indicated by a second indicator as follows:
•
None/Off — 10 Mb/s
•
Green — 100 Mb/s
•
Orange — 1000 Mb/s
Lifesize Icon Installation Guide
9