AT&T Partner II Installation And Use Manual page 56

phone connected to extension jack 10, lines ring according to defaults
("immediate ring" for the primary line and "delayed ring" for secondary lines). If
you are combining Local Call Coverage with button-down operation, you may
want to adjust Line Ringing at covering extensions so that some secondary lines
ring. (To put the system into button-down mode, see page 5-10.)
Table 4-3 shows the settings you must change to switch from Central Call
Coverage to Local Call Coverage. The first column shows the name of the
programming procedure or function. System Programming procedures, which
determine how the equipment controller handles lines and extensions, include
the procedure number in parentheses—for example, "Line Assignment (#301)."
Telephone Programming procedures, which affect the operation of individual
extensions, show only the name of the procedure. (See Chapter 5 for more
information on programming.) The remaining columns show the required and
optional settings for this call coverage setup.
Table 4-3. Programming for Local Call Coverage
Procedure Setting at
Extension
Jack 10
Remove any
Line
Assignment assignments
(#301) for lines that
you do not
want covered.
Line Set secondary
lines to
Access
"incoming
Restriction
(#302) only" if you
want to control
use of
secondary
lines (see page
4-16). Any
Centrex calling
restrictions for
the line are
also in effect.
Automatic Make sure the
Extension setting is "not
assigned," so
Privacy
that users at
(#304)
covered
extensions will
be able to join
conversations
on their
primary lines.
4-8 Customizing Your System
Setting For Covering
Extensions
Assign any secondary lines
to be covered by the
extension.
Set secondary lines to
"incoming only" if you want
to control use of secondary
lines (see page 4-16). Any
Centrex calling restrictions
for the line are also in effect.
Make sure the setting is
"not assigned," so that
users at covered
extensions will be able to
join conversations on their
primary lines.
Setting For Covered Extensions
No change required
No change required
Set to "assigned" (or program
Privacy on a lighted button) to
prevent users at covering
extensions from joining calls on this
extension's primary line.