AT&T Partner II Installation And Use Manual page 131

Using the Message Light
To turn on the message light
See page 5-16 for instructions on programming
this feature onto a button of an MLS- or
MLC-model phone.
Turns on the message light on another MLS- or
MLC-model phone. Although anyone can use
this feature, it is typically used by a receptionist to
let someone know a message is waiting.
To turn off the message light
See page 5-16 for instructions on programming
this feature onto a button of an MLS- or
MLC-model phone.
Turns off the message light on another MLS- or
MLC-model phone.
*
If you are using an MLC-6 cordless phone, make sure the handset is on before following these
instructions. For more information on using the MLC-6 phone, see AT&T MLC-6 Cordless
Telephone Quick Reference: Display and Controls.
On an MLS- or MLC-Model Phone*
1. Press the button programmed with the
Message Light On feature.
2. Dial the extension jack number.
1. Press the button programmed with the
Message Light Off feature.
2. Dial the extension jack number.
Using Intercom Features B-5