Balance - Bernina 580 Manual

Balance

54
Balance
Practical and decorative stitches
The sewing computer is tested and optimally set before it leaves the BERNINA
factory. Different fabrics, threads and stabilizers can affect programmed
stitches so that they are not sewn out properly. These effects can be corrected
with the electronic Balance so that the stitch formation can be adjusted where
necessary to suit the material.
touch «i»-icon
█
touch «Balance»-icon
█
►
in the left part of the Display the stitch pattern is shown as it is set originally
(programmed)
►
in the right part of the Display any alterations are directly visible
Corrections
The stitch sewn on the fabric (e.g. the Honeycomb stitch) opens up and it does
not look correct:
adjust the stitch length by turning the stitch width or stitch length knob, until
█
the stitch in the right part of the Display is identical with the stitch on the
fabric
►
the alteration is shown with a number in the yellow-framed icon
touch «Back»-icon 2x
█
►
alterations are saved
►
the previous Display appears
Reset settings
touch «i»-icon
█
touch yellow-framed «Balance»-icon
█
touch yellow-framed icon
█
►
basic setting is reset
033527.53.04_2014-07_Manual_B580_EN