Bernina 580 Manual page 132

Thread breakage
In the left Display the motif is shown in the normal size.
In the right Display the motif is enlarged.
Edit
In this Display the motif can be edited.
Disengage jump stitches
By default the function is active (yellow-frame). Jump
stitches are automatically cut.
touch the button
█
jump stitches must be trimmed manually
█
Color numbers
Display of the motif color numbers.
touch the button
█
►
Display providing the color information to the
selected motif is opnened
Embroidering the motif by color
With the icon deactivated, the number and sequence of
colors remain as initially set.
Reducing color change
With the icon activated, the motif sections with identical
colors are resequenced and color changes reduced.
Single/Multi-Color Motif
If the icon is active, the entire motif will be embroidered
in one color (without stopping).
If the icon is inactive, the colors will be embroidered
individually.
Security Program
touch the button
█
touch desired «Needle»- and/or «Stitch plate»-icon
█
►
if the «Security»-icon is yellow-framed, the correct stitch plate
is not attached or selected
033527.53.04_2014-07_Manual_B580_EN
«Embroidery menu»/«Start/Stop»-button
The alternating blinking symbols indicate that:
►
the embroidery Display is opened
►
the embroidery computer is ready to embroider
The embroidery computer must be started by pressing
the «Start/Stop»-button on the headframe.
Overview Display
131