Bernina 580 Manual page 64

Hide thumbs Also See for 580:
Table of Contents

Advertisement

Zipper
Zipper foot No. 4
Straight stitch No. 1
Preparation
close seam to the zipper beginning
sew securing stitches
baste seam closed and clean
finish the seam allowance
iron the seam
open the zipper
baste the zipper: baste or pin zipper in place so that fabric folded edges
meet over the center of the zipper
Sewing in the zipper
open zipper a little
move needle position to the right
start sewing from top left
position the foot so the needle stitches along the edge of the zipper coils
stop in front of the pull (needle position down)
raise the presser foot
close the zipper again
lower the presser foot
continue to sew, stop in front of the base of the zipper, needle position
down
raise the presser foot
turn the sewing project
lower the presser foot
sew across the seam, stop with needle position down
raise the presser foot
turn sewing project again
lower the presser foot
sew the second side from bottom to top
Variation: Sew both sides of zipper from bottom to top
Suitable for all fabrics with nap or grain (e.g. velvet).
prepare zipper as described above
start sewing in the seam of the zipper end and sew first side from bottom to
1
top
sew diagonal along the edge of the zipper coils
first side 1 sew from bottom to top
2
move needle position to the left
second side 2 sew in the same way from bottom to top
Sew around the zipper pull
̶ sew up to about 5cm away from the zipper pull
̶ stop with the needle down, raise the presser foot, open the
zipper, lower the presser foot, finsih sewing (use Free Hand
System)
Seam begin
̶ hold thread firmly when starting to sew = pull fabric slightly to the
back (fewer stitches) or
̶ sew about 1-2cm reverse first, and continue to sew as usual
Zipper or fabric is thick or densely woven
For even stitch formation use a 90-100 needle.
033527.53.04_2014-07_Manual_B580_EN
Practical stitches
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents