SIDE LIGHTS
KNOW YOUR
To replace the bulb, proceed as follows:
VEHICLE
❒ remove protective cover B fig. 189, rotating
anticlockwise;
❒ remove snap-fitted bulb holder A fig. 190, remove
SAFETY
bulb B and replace it;
❒ refit the snap-fitted bulb holder A fig. 190;
❒ refit the protective cover B fig. 189, turning it
STARTING AND
clockwise and making sure that it locks correctly.
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 190
200
MAIN BEAM HEADLIGHTS
To replace the bulb, proceed as follows:
❒ remove protective cover C fig. 189, rotating it
anticlockwise;
❒ disconnect electrical connector A fig. 191; release
bulb holder catch B;
❒ remove the bulb C and replace it;
❒ fit the new bulb, ensuring that the outline of the
metal part coincides with the grooves on the
curve of the headlight, re-attach catch B and
reconnect connector A;
❒ refit the protective cover C fig. 189, turning it
clockwise and making sure that it locks correctly.
fig. 191
F0N0082
F0N0083