4 INTRODUCTION The enclosed Warranty Information lists the services that INTRODUCTION FCA US LLC offers to its customers: Congratulations on selecting your new vehicle. Be as- sured that it represents precision workmanship, distinc- • The Warranty Certificate with terms and conditions for tive styling, and high quality - all essentials that are maintaining its validity traditional to our vehicles.
INTRODUCTION 5 HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment. The detailed index at the back of this Owner’s Manual contains a complete listing of all subjects.
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information.
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .11 ▫ Remote Key Unlock, Driver Door/All Doors 1st Press .......16 ▫...
Page 12
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE POWER WINDOWS .....23 ▫ Transporting Pets ..... .76 ▫...
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 The vehicle is supplied with a code card containing key A WORD ABOUT YOUR KEYS code numbers to order duplicate keys, and the autho- The key fob contains the Remote Keyless Entry (RKE) rized dealer that sold you your new vehicle has the key transmitter with an integrated key.
Page 14
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Before exiting a vehicle, always turn the ignition to the OFF/LOCK position, apply the parking brake, shift the transmission into REVERSE gear, and remove the Key Fob from the vehicle. When leav- ing the vehicle, always lock your vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key-In-Ignition Reminder WARNING! (Continued) Opening the driver’s door when the key is in the ignition • Do not leave children or animals inside parked and the ignition switch position is OFF/LOCK sounds a vehicles in hot weather.
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: A key which has not been programmed is also All of the keys provided with your new vehicle have considered an invalid key, even if it is cut to fit the been programmed to the vehicle electronics.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 General Information The Sentry Key® system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. •...
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors 1st Press This feature lets you program the system to unlock either the driver’s door or all doors on the first push of the...
Page 19
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Opening Power Top Remote Function: WARNING! (Continued) 1. OPEN — Push and hold the unlock button down on • Before operating the power top, make sure that no the key fob for a minimum of three seconds to initiate moving parts of the convertible top can injure a Power Top Open.
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Push the mechanical key release button and release the To Lock The Doors And Liftgate mechanical key to access the battery case screw lo- Push and release the LOCK button on the RKE transmit- cated on the side of the Key Fob.
Page 21
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 2. Rotate the screw located on the side of the Key Fob 3. Take out the battery case. Remove and replace the using a small screwdriver. battery observing its polarity. Key Fob Screw Location Battery Case Removed 4.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If your RKE transmitter fails to operate from a normal General Information distance, check for these two conditions: This device complies with Part 15 of the FCC rules and RSS-210 of Industry Canada. Operation is subject to the 1.
Page 23
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 WARNING! (Continued) • For personal security and safety in the event of a collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • Before exiting a vehicle, always turn the ignition to the OFF/LOCK position, apply the parking brake, shift the transmission into REVERSE gear, and remove the Key Fob from the vehicle.
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: To prevent the key from being locked in the WARNING! (Continued) vehicle, the doors will automatically unlock if the driv- • Do not leave the Key Fob in or near the vehicle, or er’s door handle is pushed when the key is in the in a location accessible to children.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Autoclose POWER WINDOWS When enabled, the door locks will lock automatically Power Window Switches when the vehicle’s speed exceeds 15 mph (24 km/h). The There are single window controls located on the shifter auto door lock feature can be enabled or disabled using bezel, below the climate controls, which operate the Electronic Vehicle Information Center (EVIC).
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
Page 27
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 To open the liftgate, squeeze the liftgate release handle WARNING! and pull the liftgate open with one fluid motion. • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes.
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. If a child from 2 to 12 years old (not in a rear-facing OCCUPANT RESTRAINT SYSTEMS child restraint) must ride in the front passenger seat, Some of the most important safety features in your move the seat as far back as possible and use the vehicle are the restraint systems: proper child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 6. All occupants should always wear their lap and WARNING! shoulder belts properly. • Never place a rear-facing child restraint in front of 7. The driver and front passenger seats should be moved an air bag.
Page 30
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Research has shown that seat belts save lives, and they The BeltAlert warning sequence begins after the vehicle can reduce the seriousness of injuries in a collision. Some speed is over 5 mph (8 km/h) by blinking the Seat Belt of the worst injuries happen when people are thrown Reminder Light and sounding an intermittent chime.
Page 31
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 pets be restrained in the rear seat (if equipped) in pet will lock and reduce your risk of striking the inside of the harnesses or pet carriers that are secured by seat belts, vehicle or being thrown out of the vehicle.
Page 32
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • It is dangerous to ride in a cargo area, inside or • Two people should never be belted into a single outside of a vehicle. In a collision, people riding in seat belt.
Page 33
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! (Continued) WARNING! (Continued) • A seat belt that is buckled into the wrong buckle • A shoulder belt placed behind you will not protect will not protect you properly. The lap portion could you from injury during a collision.
Page 34
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear seat (for vehicles equipped with a rear seat).
Page 35
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low 5. Position the shoulder belt across the shoulder and across your hips, below your abdomen. To remove chest with minimal, if any slack so that it is comfort- slack in the lap belt portion, pull up on the shoulder able and not resting on your neck.
Page 36
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the seat belt, push the red button on the 3. Slide the latch plate upward over the folded webbing. buckle. The seat belt will automatically retract to its The folded webbing must enter the slot at the top of stowed position.
Page 37
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Pregnant women should wear the lap part of the seat belt WARNING! across the thighs and as snug across the hips as possible. Keep the seat belt low so that it does not come across the •...
Page 38
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The pretensioners are triggered by the Occupant Re- Restraints” section of this manual. The table below straint Controller (ORC). Like the air bags, the preten- defines the type of feature for each seating position. sioners are single use items.
Page 39
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 In Automatic Locking Mode, the shoulder belt is auto- Driver Center Passenger matically pre locked. The seat belt will still retract to First Row remove any slack in the shoulder belt. The Automatic Second Locking Mode is available on all passenger seating positions with a combination lap/shoulder belt.
Page 40
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Engage The Automatic Locking Mode WARNING! 1. Buckle the combination lap and shoulder belt. • The seat belt assembly must be replaced if the 2. Grasp the shoulder portion and pull downward until switchable Automatic Locking Retractor (ALR) fea- the entire seat belt is extracted.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 • Seat Belt Pretenioners Supplemental Restraint System (SRS) Air Bag System Components • Seat Belt Buckle Switch Your vehicle may be equipped with the following air bag • Seat Track Position Sensors system components: Advanced Front Air Bags •...
Page 42
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 43
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Advanced Front Air Bag Features the driver or front passenger seat belt is buckled. The seat belt buckle switch may adjust the inflation rate of the The Advanced Front Air Bag system has multistage Advanced Front Air Bags.
Page 44
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE On the other hand, depending on the type and location of WARNING! (Continued) impact, Advanced Front Air Bags may deploy in crashes • Relying on the air bags alone could lead to more with little vehicle front-end damage but that produce a severe injuries in a collision.
Page 45
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 way as the air bags inflate to their full size. The Advanced Supplemental Driver Knee Air Bag Front Air Bags fully inflate in less time than it takes to This vehicle is equipped with a Supplemental Driver blink your eyes.
Page 46
44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the SAB deploys, it opens the seam on the out- board side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 47
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 • Supplemental Side Air Bag Inflatable Curtains SABICs may help reduce the risk of head injury to front (SABICs): Located above the side windows. The trim and rear seat outboard occupants in certain side impacts. covering the SABICs is labeled “SRS AIRBAG”...
Page 48
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to WARNING! activate in certain side impacts. The Occupant Restraint Controller (“ORC”) determines whether the deployment • Your vehicle is equipped with left and right of the Side Air Bags in a particular impact event is Supplemental Side Air Bag Inflatable Curtains appropriate, based on the severity and type of collision.
Page 49
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 compartment. The Side Air Bags may deploy during be properly restrained in a child restraint or booster seat angled or offset frontal collisions where the Advanced that is appropriate for the size of the child. Front Air Bags deploy.
Page 50
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If A Deployment Occurs • As the air bags deflate, you may see some smoke-like particles. The particles are a normal by-product of the The Advanced Front Air Bags are designed to deflate process that generates the non-toxic gas used for air immediately after deployment.
Page 51
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 • Cut off fuel to the engine. WARNING! (Continued) • Flash hazard lights as long as the battery has power or seat belt pretensioners, and the seat belt retractor until the ignition switch is turned to the “OFF” posi- assemblies replaced by an authorized dealer imme- tion.
Page 52
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Action Customer Will See 1. Turn ignition OFF. (Turn Signal Switch Must be placed in Neutral State). 2. Turn ignition ON. Left Turn Light is OFF. Right Turn Light BLINKS. 3. Turn Right Turn Signal Switch ON. Right Turn Light is ON SOLID.
Page 53
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 If a reset procedure step is not completed within 45 The ORC contains a backup power supply system that seconds, then the turn signal lights will turn off and the may deploy the air bags even if the battery loses power or reset procedure must be performed again in order to be it becomes disconnected prior to deployment.
Page 54
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While the air bag system is designed to be maintenance WARNING! free, if any of the following occurs, have an authorized dealer service the air bag system immediately. Ignoring the Air Bag Warning Light in your instru- ment panel could mean you won’t have the air bags •...
Page 55
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Maintaining Your Air Bag System WARNING! (Continued) • Do not attempt to modify any part of your air bag WARNING! system. The air bag may inflate accidentally or may • Modifications to any part of the air bag system not function properly if modifications are made.
Page 56
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE bag deployment or hitting a road obstacle, data that will NOTE: EDR data are recorded by your vehicle only if a assist in understanding how a vehicle’s systems per- non-trivial crash situation occurs; no data are recorded by formed.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Child Restraints WARNING! Everyone in your vehicle needs to be buckled up at all In a collision, an unrestrained child can become a times, including babies and children. projectile inside the vehicle. The force required to Every state in the United States, and every Canadian hold even an infant on your lap could become so province, requires that small children ride in proper...
Page 58
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for NOTE: children from newborn size to the child almost large • For additional information, refer to www.seatcheck.org or enough for an adult safety belt. Always check the child call 1–866–SEATCHECK.
Page 59
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Children who are two years old or Either an Infant Carrier or a Convertible Toddlers younger and who have not reached the Child Restraint, facing rearward in the rear...
Page 60
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints carrier but are still less than at least two years old. Children should remain rear-facing until they reach the Safety experts recommend that children ride rear-facing highest weight or height allowed by their convertible in the vehicle until they are two years old or until they child seat.
Page 61
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Older Children And Child Restraints All children whose weight or height is above the forward-facing limit for the child seat should use a Children who are two years old or who have outgrown belt-positioning booster seat until the vehicle’s seat belts their rear-facing convertible child seat can ride forward- fit properly.
Page 62
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • When your child restraint is not in use, secure it in • Improper installation can lead to failure of an the vehicle with the seat belt or LATCH anchor- infant or child restraint.
Page 63
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 2. Do the child’s knees bend comfortably over the front position. If the shoulder belt contacts the face or neck, of the vehicle seat – while they are still sitting all the move the child closer to the center of the vehicle, or use way back? a booster seat to position the seat belt on the child...
Page 64
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 65
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Lower Anchors And Tethers For Children (LATCH) Your vehicle is equipped with the child restraint anchor- Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 66
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Lower Anchorage Symbol 2 anchorages per • seating position Top Tether Anchorage Symbol •...
Page 67
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system weight + weight of the child re- until the combined weight of the straint) for using the LATCH an- child and the child restraint is chorage system to attach the child 65 lbs (29.5 kg).
Page 68
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Can two child restraints be at- Never “share” a LATCH anchorage tached using a common lower with two or more child restraints. LATCH anchorage? If the center position does not have dedicated LATCH lower anchor- ages, use the seat belt to install a child seat in the center position next to a child seat using the...
Page 69
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage sym- bols on the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 70
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH-compatible child restraint systems will be Always follow the directions of the child restraint manu- equipped with a rigid bar or a flexible strap on each side. facturer when installing your child restraint. Not all child Each will have a hook or connector to attach to the lower restraint systems will be installed as described here.
Page 71
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 forward and rearward in the vehicle, you may wish to 6. Test that the child restraint is installed tightly by move it to its rear-most position to make room for the pulling back and forth on the child seat at the belt child seat.
Page 72
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using The Vehicle Seat WARNING! Belt • Improper installation of a child restraint to the The seat belts in the passenger seating positions are LATCH anchorages can lead to failure of the re- equipped with a Switchable Automatic Locking Retractor straint.
Page 73
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle • ALR = Switchable Automatic Locking Retractor Top Tether Anchorage Symbol •...
Page 74
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to with the seat belt to attach a for-...
Page 75
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 76
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. See the section “Installing Child Restraints WARNING! (Continued) Using the Top Tether Anchorage” for directions to tether strap of a rear-facing car seat to the tether attach a tether anchor. anchorage that is approved for that seating position, 9.
Page 77
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available. 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and...
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and • An incorrectly anchored tether strap could lead to drivetrain (transmission and axle) in your vehicle. increased head motion and possible injury to the Drive moderately during the first 300 miles (500 km).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil • Do not leave children or animals inside parked in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 not lit during starting, see your authorized dealer. If the Safety Checks You Should Make Inside The light stays on, flickers, or comes on while driving, have Vehicle the system checked by an authorized dealer. Seat Belts Defroster Inspect the seat belt system periodically, checking for...
Page 82
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Always Pedals that cannot move freely can cause loss of properly reinstall and secure floor mats that have vehicle control and increase the risk of serious per- been removed for cleaning.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Door Latches Periodic Safety Checks You Should Make Outside The Vehicle Check for proper closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 85
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS POWER CONVERTIBLE TOP — IF EQUIPPED . .86 ▫ Heated Mirrors — If Equipped ... .93 ▫ Lowering The Power Top....86 ▫...
Page 86
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ EZ Entry Feature ..... .104 ▫ Lane Change Assist ....112 ▫...
Page 87
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 ▫ To Vary The Speed Setting ....121 ▫ Pinch Protect Feature ....132 ▫...
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: POWER CONVERTIBLE TOP — IF EQUIPPED On vehicles equipped with a power convertible top, the • The power top buttons will operate when the ignition power convertible top switch is located on the overhead switch is turned to the ACC/ON/RUN position.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 NOTE: Vertical movement only operates in auto open/ NOTE: Rail lubrication is recommended every 2000 close mode. cycles, or if scratching noises due to dust are present. Refer to “Fluids, Lubes, and Genuine Part” in “Maintain- Raising The Power Top ing Your Vehicle”...
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Convertible Top Relearn Procedure CAUTION! (Continued) If your power convertible top does not operate in the • Use care when washing the vehicle, water pressure Auto Opening/Closing mode (automatically opening/ directed at the weather strip seals may cause water closing to the one-quarter open and three-quarter open to leak into the vehicle’s interior.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 6. Hold the CLOSED button to move the top to the fully NOTE: DO NOT interrupt this activity. closed position. If the power convertible top does not relearn repeat the procedure a second time. 7.
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlight glare from vehicles behind you can be reduced Automatic Dimming Mirror — If Equipped by moving the small control under the mirror to the night This mirror automatically adjusts for headlight glare position (toward the rear of the vehicle).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 Power Mirrors The power mirror controls are located on the driver’s door trim panel. Automatic Dimming Mirror CAUTION! To avoid damage to the mirror during cleaning, never Power Mirror Switches spray any cleaning solution directly onto the mirror. The power mirror controls consist of a mirror select Apply the solution onto a clean cloth and wipe the switch and a four-way mirror control switch.
Page 94
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mirror, push the mirror select switch to either the L (left) Spotter Mirror — If Equipped or R (right) to select the mirror you need to adjust. Some models are equipped with a driver’s side spotter Using the mirror control switch, push on any of the four mirror.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Folding Mirrors Sun Visors The exterior mirrors are hinged to allow the mirror to The driver and passenger sun visors are located on the pivot forward or rearward to help avoid damage. The headliner, near the front windshield.
— If Equipped voice recognition system is of the “speaker independent” Windows Mobile™-based FIAT BLUE&ME™ is a per- type. sonal telematic system enabling you to use communica- With this system you can also play your favorite music...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 steering wheel controls and the instrument panel multi- The Hands-Free Kit function display. Please refer to the Fiat Blue & Me Radio The basic characteristic of this hands-free kit is voice Supplement for further information.
Page 98
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To get started with BLUE&ME™ hands-free kit with • To interact with BLUE&ME™ you can use either the voice recognition, you have to simply pair your buttons on the steering wheel or voice commands. Bluetooth®...
Page 99
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 The hands-free kit enables the following operations: • Conference Call — you can call another contact while you are engaged in a phone conversation (with • Contact Calling By Voice — you can call a contact in Bluetooth®...
Page 100
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Message Reader Message reader functions are managed by the control buttons on the steering wheel or by the BLUE&ME™ The BLUE&ME™ message reader enables automatic voice commands. reading, through the car sound system, of the SMS texts you receive on your Bluetooth®...
Page 101
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 • To delete individual messages or the entire inbox using In this way, while you are driving you can play your the buttons on the steering wheel or voice commands. favorite music collections. The BLUE&ME™...
Page 102
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! • The media player does not support audio files com- • Driving while distracted can result in loss of ve- pressed with other formats and DRM (Digital Rights hicle control, accident and injury. It is strongly Management) protected audio files.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 WARNING! (Continued) WARNING! • Keep the Owner’s Manual in the car: when kept in • It is dangerous to ride in a cargo area, inside or the car, the Owner’s Manual will be available for outside of a vehicle.
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Seat Height Adjustment The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pump the lever upward to raise the seat height, or pump the lever downward to lower the seat height.
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lift the seatback upright and push the seat rearward to EZ Entry Feature its locked position once the rear passengers are seated. The driver and front passenger seats have an EZ entry feature for rear seat passengers. Pull upward on the Memory Feature release tether, located on the outboard side of the seat- Both front seats have a memory feature, which can...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Memory Function Option 2 — Seat Back Only Push the switch once to turn on the heated Memory: seats. Push the switch a second time to shut the After using the EZ entry function, the seat back may first heating elements off.
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) WARNING! • Do not place anything on the seat or seatback that The head restraints for all occupants must be prop- insulates against heat, such as a blanket or cushion. erly adjusted prior to operating the vehicle or occu- This may cause the seat heater to overheat.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Adjustment Button Hood Release Lever 2. Rotate the safety catch under the front edge of the TO OPEN AND CLOSE THE HOOD hood, near the center, and raise the hood. To open the hood, two latches must be released. 1.
Page 110
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Hood Safety Latch Location Hood Prop Rod 3. Lift the hood prop rod that clips to the right side (left In hot climates, the prop rod may be hot. Pick up the prop side when standing in front of the hood) of the engine rod at the foam on the end of the prop rod.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 LIGHTS CAUTION! Multifunction Lever To prevent possible damage, do not slam the hood to The multifunction lever, located on the left side of the close it. Lower the hood until it is open approxi- steering wheel, controls the operation of the headlights, mately 6 inches (15 cm), and then drop it.
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE High Beams With the low beams activated, push the multi- function lever towards the instrument panel to turn on the high beams. Pull the multifunction lever toward the steering wheel to turn off the high beams. Flash-To-Pass You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward the steer-...
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Daytime Running Lights — If Equipped To activate the Daytime Running Lights (DRL), rotate the end of the multifunction lever to the O symbol. NOTE: The low beams and side/taillights will not be on with DRL.
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Deactivation Lane Change Assist Tap the lever up or down once, without moving beyond Pull the multifunction lever toward the steering wheel the detent, and the turn signal (right or left) will flash and hold it for more than two seconds.
Page 115
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 • When the doors are unlocked with the Key Fob a 10 CAUTION! second timer is activated. Before getting out of the vehicle be sure that the • When the doors are locked with the Key Fob the lights switch is in the center position or that the lights are will turn off.
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Push the switch once to turn the front fog lights on. Push Front Fog Lights — If Equipped the switch a second time to turn the front fog lights off. The fog light switch is located on the center stack of the instrument panel, just below the radio.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Windshield Wiper Off Front Windshield Wiper Operation There are five different modes of operation for the front This is the normal position of the wiper lever. windshield wipers. The windshield wiper lever can be Intermittent Wiper Operation raised or lowered to access these modes: Push the lever downward to the first detent.
Page 118
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual High Speed/Mist CAUTION! Push the lever upward from the off position. The wipers • Turn the windshield wipers off when driving will operate at high speed to clear off road mist or spray through an automatic car wash.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Rear Windshield Wiper Rotate the end of the windshield wiper/washer lever upward to the first detent past the intermittent settings for intermittent wipe operation. With the front wind- shield wiper active, rotate the end of the windshield wiper/washer lever upward.
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Windshield Washer Operation Push the windshield wiper/washer lever toward the instrument panel to activate the rear washer. Push and hold the lever for more than a half second and the wipers will activate automatically for three cycles after the lever is released.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 The Electronic Speed Control buttons are located on the WARNING! right side of the steering wheel. Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle.
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control system has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 The drivers preferred units can be selected through the To Deactivate instrument panel settings if equipped. Refer to “Under- A soft tap on the brake pedal, pushing the CANC button, standing Your Instrument Panel” for more information. or normal brake pressure while slowing the vehicle will The speed increment shown is dependent on the selected deactivate Electronic Speed Control without erasing the...
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will • If the button is continually pushed, the set speed will continue to increase until the button is released, then continue to decrease until the button is released, then the new set speed will be established.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Using Electronic Speed Control On Hills REAR PARK ASSIST — IF EQUIPPED The transmission may downshift on hills to maintain the The Rear Park Assist system provides visual and audible vehicle set speed. indications of the distance between the rear fascia/ bumper and a detected obstacle when backing up, e.g.
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If several obstacles are detected, the Rear Park Assist Rear Park Assist Display system indicates the nearest obstacle. When the vehicle is in REVERSE, the warning display The minimum height of a detectable obstacle corresponds will turn ON indicating the system status.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 If an obstacle is detected in the left and/or right rear The tones emitted by the loudspeaker inform the driver region, the display will show solid arcs in the left and/or that the vehicle is approaching an obstacle. The pauses right rear region and will produce an audible alert.
Page 128
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Audible And Visual Signals Supplied By The Rear Park Assist System SIGNAL MEANING INDICATION Obstacle Distance An obstacle is present Audible signal (dashboard loudspeaker) within the sensors’ field • Sound pulses emitted at a rate that increases as the distance decreases.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 While audible signals are emitted, the audio system is not The warning icon is illuminated and a message muted. is displayed on the EVIC display (if equipped). Refer to Electronic Vehicle Information Center The audible signal is turned off immediately if the (EVIC) in “Understanding Your Instrument distance increases.
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Clean the Rear Park Assist sensors regularly, taking Cleaning The Rear Park Assist System care not to scratch or damage them. The sensors must Clean the Rear Park Assist sensors with water, car wash not be covered with ice, snow, slush, mud, dirt or soap and a soft cloth.
Page 131
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 CAUTION! WARNING! • Rear Park Assist is only a parking aid and it is • Drivers must be careful when backing up even unable to recognize every obstacle, including small when using the Rear Park Assist system. Always obstacles.
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED WARNING! (Continued) The power sunroof roof switch is located in the overhead • Before using the Rear Park Assist System, it is console. strongly recommended that the ball mount and hitch ball assembly is disconnected from the ve- hicle when the vehicle is not used for towing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 To Open WARNING! Push and hold the power sunroof switch rearward for • Never leave children alone in a vehicle, or with approximately one second and the sunroof will stop at access to an unlocked vehicle. Never leave the Key the vented position.
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Feature Emergency Operation This feature will detect an obstruction in the opening of In case of electrical failure the sunroof can be operated the sunroof during Express Close operation. If an ob- with the hex wrench that is located in the glove box.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Manual Sun Shade Power Outlet Power is available when the ignition switch is in the ELECTRICAL POWER OUTLETS ON/RUN or START position. Insert the cigar lighter or There is a standard 12 Volt (13 Amp) power outlet, accessory plug into the outlet for use.
Page 136
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watts (13 Amps) power rating is exceeded, the fuse protecting the system will need to be replaced. •...
Page 137
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! CAUTION! To avoid serious injury or death: • Many accessories that can be plugged in draw • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER — IF EQUIPPED CUPHOLDERS This is located on the center console, in front of the cup For the driver and front passenger, cupholders are lo- holders. To activate the cigar lighter, push and release the cated on the floor console between the front seats.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 For rear passengers, there are cupholders located on the STORAGE floor between the front driver and passenger seats. Glove Compartment The glove compartment is located on the right side of the instrument panel. Pull outward on the glove compart- ment latch to open the glove compartment.
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES The rear seatbacks have a fold down feature to allow increased cargo capacity. Push down the release button, located at the outboard top of the seatback and move the seatback to its folded- down position to provide a flat load floor cargo area.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 REAR WINDOW FEATURES Rear Window Defroster The rear window defroster button is located in the center of the instrument panel, below the radio. Push this button to turn on the rear window defroster. An indicator in the instrument cluster will illuminate when the rear window defroster is on.
Page 142
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
UNDERSTANDING YOUR INSTRUMENT PANEL 143 INSTRUMENT PANEL FEATURES 1 — Side Vent 7 — Passenger Air Bag 13 — Storage Compartment 2 — Multifunction Lever – Light Control 8 — Glove Compartment 14 — Shift Lever 3 — Instrument Cluster And Warning Lights 9 —...
144 UNDERSTANDING YOUR INSTRUMENT PANEL TURBO BOOST GAUGE Your vehicle is equipped with a boost gauge and inte- grated shift light indicator located to the left of the instrument cluster. The boost gauge indicates the intake manifold pressure relative to barometric pressure. The engine management system in your vehicle intelligently regulates intake manifold pressure based on environ- mental (ambient) and engine operating conditions.
148 UNDERSTANDING YOUR INSTRUMENT PANEL on a significantly under-inflated tire causes the tire to INSTRUMENT CLUSTER DESCRIPTIONS overheat and can lead to tire failure. Under-inflation also 1. Tire Pressure Monitoring Telltale Light — If Equipped reduces fuel efficiency and tire tread life, and may affect Each tire, including the spare (if provided), the vehicle’s handling and stopping ability.
Page 151
UNDERSTANDING YOUR INSTRUMENT PANEL 149 as intended. TPMS malfunctions may occur for a variety CAUTION! (Continued) of reasons, including the installation of replacement or sensor damage. Using aftermarket tire sealants may alternate tires or wheels on the vehicle that prevent the cause the Tire Pressure Monitoring System (TPMS) TPMS from functioning properly.
Page 152
150 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the • A continuous chime will sound if the vehicle is problem diagnosed and corrected. driven more than 1 mile (1.6 km) with either turn signal on.
Page 153
UNDERSTANDING YOUR INSTRUMENT PANEL 151 5. Air Bag Warning Light beam. Pull the lever toward you to switch the headlights back to low beam. If the driver’s door is open, and the This light will turn on for four to eight seconds headlights or park lights are left on, the high beam as a bulb check when the ignition switch is first indicator light will remain illuminated and a chime will...
Page 154
152 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Malfunction Indicator Light (MIL) Although your vehicle will usually be drivable and not need towing, see your authorized dealer for service as The Malfunction Indicator Light (MIL) is part soon as possible. of an onboard diagnostic (OBDII) system which monitors the emissions and engine con- CAUTION! trol system.
Page 155
UNDERSTANDING YOUR INSTRUMENT PANEL 153 13. Rear Defrost Indicator WARNING! (Continued) This indicator will illuminate when the rear win- drive slowly or park over flammable substances such dow defroster is on. The rear window defroster as dry plants, wood, cardboard, etc. This could result automatically turns off after 20 minutes.
154 UNDERSTANDING YOUR INSTRUMENT PANEL 14. Brake Warning Light The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic This light monitors various brake functions, system. A leak in either half of the dual brake system is including brake fluid level and parking brake indicated by the Brake Warning Light, which will turn on application.
Page 157
UNDERSTANDING YOUR INSTRUMENT PANEL 155 The light also will turn on when the parking brake is WARNING! applied with the ignition switch in the ON/RUN posi- tion. Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. NOTE: This light shows only that the parking brake is It will take longer to stop the vehicle.
Page 158
156 UNDERSTANDING YOUR INSTRUMENT PANEL brakes. If the ABS light does not turn on when the a more fuel efficient drive style and will increase ignition switch is turned to the ON/RUN position, have your fuel economy. A lower “ECO” index indicates the light inspected by an authorized dealer.
Page 159
UNDERSTANDING YOUR INSTRUMENT PANEL 157 18. Electronic Vehicle Information Center (EVIC) CAUTION! (Continued) The EVIC features a driver-interactive display that is “H” pull over and stop the vehicle. Idle the vehicle located in the instrument cluster. Refer to “Electronic with the air conditioner turned off until the pointer Vehicle Information Center (EVIC)”...
Page 160
158 UNDERSTANDING YOUR INSTRUMENT PANEL 20. Tachometer that the door jamb sticker is accurate if the odometer must be reset at zero. The tachometer indicates engine speed in Revolutions Per Minute (RPM x 1000). NOTE: If the vehicle is equipped with the Electronic Vehicle Information Center (EVIC) in the instrument 21.
Page 161
UNDERSTANDING YOUR INSTRUMENT PANEL 159 Failure, External Light Failure, Fuel Cut-Off Intervention, Refer to “Jump Starting Procedures” in “What To Do In Fuel Cut-Off Not Available, Parking Sensor Failure. Emergencies” if jump starting is required. 24. Cruise On Indicator — If Equipped 26.
Page 162
160 UNDERSTANDING YOUR INSTRUMENT PANEL on briefly as a bulb check. If the light does not come on 28. Engine Temperature Warning Light during starting, have the system checked by an autho- This light warns of an overheated engine condi- rized dealer.
UNDERSTANDING YOUR INSTRUMENT PANEL 161 The EVIC consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) • System Status The Electronic Vehicle Information Center (EVIC) fea- • Vehicle Information Warning Message Displays tures a driver-interactive display that is located in the instrument cluster.
UNDERSTANDING YOUR INSTRUMENT PANEL 163 5. Red Telltales (Right Bank) Push and release the UP button to scroll upward through the displayed menu and the related options • Trunk Ajar or to increase the displayed value. • Transmission Failure Push and release the DOWN button to scroll down- •...
164 UNDERSTANDING YOUR INSTRUMENT PANEL • Speed Display Electronic Vehicle Information Center (EVIC) Setup Menu • Autoclose The menu comprises a series of functions arranged in a • Units cycle. Push and release the UP and DOWN but- • Language tons to access the different options and settings (setup).
UNDERSTANDING YOUR INSTRUMENT PANEL 165 Selecting An Option Of The Main Menu Without 3. Briefly push and release the MENU button to select Submenu the displayed submenu option and to open the rel- evant setup menu. 1. Briefly push and release the MENU button to select the main menu option to set.
166 UNDERSTANDING YOUR INSTRUMENT PANEL after a single chime has sounded to indicate the next NOTE: If the indicator message illuminates when you scheduled oil change interval. The engine oil change start the vehicle, the oil change indicator system did not indicator system is duty cycle based, which means the reset.
Page 169
UNDERSTANDING YOUR INSTRUMENT PANEL 167 New Trip Start Of Trip Procedure To reset: With the ignition on, push and hold the TRIP button for over one second to reset. • Push and hold the TRIP button to reset the system manually.
168 UNDERSTANDING YOUR INSTRUMENT PANEL • Average speed B Trip Functions Both trip functions are resettable (reset — start of new • Travel time B (driving time) trip). NOTE: “Trip B” functions may be excluded (see “Trip “Trip A” can be used to display the figures relating to: B Data”).
UNDERSTANDING YOUR INSTRUMENT PANEL 169 NOTE: The range depends on several factors: driving Travel Time style, type of route (freeway, residential, mountain roads, This value shows the time elapsed since the last reset. etc.), conditions of use of the car (load, tire pressure, etc.). Trip planning must take into account the above notes.
Page 172
170 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Briefly push and release the MENU button to go back 3. When the function is activated (On), briefly push and to the menu screen or push and hold the MENU release the MENU button to display the presently set (approximately one second) to go back to the main activation speed.
Page 173
UNDERSTANDING YOUR INSTRUMENT PANEL 171 To cancel the setting, proceed as follows: For activation / deactivation, proceed as follows: 1. Briefly push and release the MENU button. “On” will 1. Briefly push and release the MENU button. flash on the display. 2.
Page 174
172 UNDERSTANDING YOUR INSTRUMENT PANEL Proceed as follows: 7. Push and release the UP or DOWN button for setting. 1. Briefly push and release the MENU button. Push and release the UP or DOWN buttons to highlight NOTE: Set Time — Push and release the MENU button. •...
Page 175
UNDERSTANDING YOUR INSTRUMENT PANEL 173 When you have selected the required settings, briefly 3. Briefly push and release the MENU button and push and release the MENU button to go back to the “month” will flash on the display. Time, Mode sub-menu screen, or push and hold the 4.
Page 176
174 UNDERSTANDING YOUR INSTRUMENT PANEL button (approximately one second) to go back to the 3. Briefly push and release the MENU button to go back main screen without storing the settings. to the menu screen, or push and hold the MENU button (approximately one second) to go back to the See Radio (Repeat Audio Information) main screen without storing the settings.
Page 177
UNDERSTANDING YOUR INSTRUMENT PANEL 175 2. Push and release the UP or DOWN button to 2. Push and release the UP or DOWN button for select display deactivation “Off”, “MPH” or “km/h.” setting. 3. Briefly push and release the MENU button to go back 3.
Page 178
176 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Push and release the UP or DOWN button to If the distance unit set is “mi,” the fuel economy unit will navigate the three sub-menus. be displayed in “mpg.” 3. Select the required sub-menu and then briefly push If the distance unit set is “km,”...
Page 179
UNDERSTANDING YOUR INSTRUMENT PANEL 177 When you have made the required settings, briefly push 3. Briefly push and release the MENU button to go back and release the MENU button to go back to the sub-menu to the menu screen, or push and hold the MENU screen, or push and hold the MENU button (approxi- button (approximately one second) to go back to the mately one second) to go back to the main screen without...
Page 180
Indication) This function may be used to adjust the volume of the beep accompanying the buttons. MENU, UP This function will only be displayed after a FIAT Group DOWN buttons can be adjusted according to 8 Automobiles dealership has deactivated the S.B.R. sys- levels.
Page 181
UNDERSTANDING YOUR INSTRUMENT PANEL 179 2. Briefly push and release the MENU button. “On” or • Fuel Econ Off – the fuel economy upshift light is “Off” will flash on the display (according to previous disabled. setting). To set the required unit, proceed as follows: 3.
Page 182
180 UNDERSTANDING YOUR INSTRUMENT PANEL screen, or push and hold the MENU button (approxi- 3. Briefly push and release the MENU button to go back mately one second) to go back to the main screen without to the menu screen, or push and hold the button storing the settings.
Page 183
UNDERSTANDING YOUR INSTRUMENT PANEL 181 3. Briefly push and release the MENU button to go back Exit Menu to the menu screen, or push and hold the button This function closes the initial menu screen. (approximately one second) to go back to the main Briefly push and release the MENU button to go back to screen.
182 UNDERSTANDING YOUR INSTRUMENT PANEL If the radio has BLUE&ME™, refer to the appropriate SALES CODE (RAB) RADIO “BLUE&ME™ User’s Manual” for further information. The instructions for use are given below and we recom- mend you to read them carefully. Suggestions Road Safety Please, learn how to use all different radio functions (e.g.
Page 185
UNDERSTANDING YOUR INSTRUMENT PANEL 183 • Clean every CD thoroughly removing any finger WARNING! marks or dust using a soft cloth. Hold CDs by the outside and clean them from the middle outwards. Having the volume turned up high can cause the driver to not be able to hear important traffic sounds, •...
184 UNDERSTANDING YOUR INSTRUMENT PANEL • The use of original CD media is required for the best • The CD player is capable of reading most compression quality audio production. Correct operation is not systems currently in use, following the development of guaranteed when CD-R/RW media are used that were these systems, the reading of all compression formats not correctly burned and/or with a maximum capacity...
UNDERSTANDING YOUR INSTRUMENT PANEL 185 With Alpine Premium Audio system (if equipped): • Antenna on the car roof. • Two 165 mm diameter midwoofer speakers. • Radio with CD/MP3 player. With BEATS Premium Audio system (if equipped): • Two 11 mm tweeter speakers in the front pillars. •...
Page 188
186 UNDERSTANDING YOUR INSTRUMENT PANEL BUTTON GENERAL FUNCTIONS MODE A-B-C Cycles A, B, C presets for AM, FM, Short repeated button push SAT (if equipped) MEDIA CD/AUX/Media Player (if equipped Short repeated button push and present) source selection BUTTON GENERAL FUNCTIONS MODE (Mute/Pause Volume...
Page 189
UNDERSTANDING YOUR INSTRUMENT PANEL 187 BUTTON GENERAL FUNCTIONS MODE MENU Advanced functions adjustment Menu activation: short button push Adjustment type selection: push Adjustment of values: push +Vol/–Vol Volume adjustment Push + button: volume increase Push – button: volume decrease BUTTON RADIO FUNCTIONS MODE Radio Station Search:...
188 UNDERSTANDING YOUR INSTRUMENT PANEL BUTTON CD FUNCTIONS MODE CD ejection Short button push Previous/next track play Short button push CD track fast forward/rewind Long button push Previous/next folder play (for CD- Short button push MP3) • Manual storing of 25 stations (base radio) and 40 General Information stations (if equipped with Satellite): 15 on FM band The radio offers the following functions:...
Page 191
UNDERSTANDING YOUR INSTRUMENT PANEL 189 CD Section • Track selection (forward/backward) • Track selection (forward/backward) • Fast forward/rewind through tracks • Fast forward/rewind through tracks • MP3 Display function: display of folder name, ID3- TAG information, time elapsed since the start of the •...
190 UNDERSTANDING YOUR INSTRUMENT PANEL Selecting The CD Function Functions And Adjustments By briefly pushing the MEDIA button, the CD audio Turning The Car Radio On source can be selected (only if a CD is loaded). The car radio comes on when the (ON/OFF) button is pushed briefly.
Page 193
UNDERSTANDING YOUR INSTRUMENT PANEL 191 When the volume level is changed using the dedicated The functions managed by the Audio Menu are: controls, the Mute function is deactivated and the vol- • BASS (Bass adjustment) ume is adjusted to the new level selected. •...
Page 194
192 UNDERSTANDING YOUR INSTRUMENT PANEL Tone Adjustment 3. Push the button to increase the sound from the left speakers or the button to increase the sound Proceed as follows: from the right speakers. 1. Push the AUDIO button. By pushing the buttons briefly, the levels will 2.
Page 195
UNDERSTANDING YOUR INSTRUMENT PANEL 193 By pushing the buttons briefly, the levels will Preset/User/Classic/Rock/Jazz Functions — If change progressively. By pushing them down longer, Equipped the levels will change quickly. The built-in equalizer can be activated/deactivated. When the equalizer function is off, the audio settings can Select the value “0”...
Page 196
194 UNDERSTANDING YOUR INSTRUMENT PANEL • “Rock” (equalizer preset for optimal rock and pop 5. On the display a seven bar graph will appear, in which music sound) each bar represents a frequency. Select the bar to be adjusted by using the buttons.
Page 197
UNDERSTANDING YOUR INSTRUMENT PANEL 195 The functions managed by the Menu are: inside the passenger compartment. To activate/ deactivate the function, use the buttons. The wording • Speech Volume “Speed volume” appears on the display, followed by the • Aux Audio Offset current status of the function: •...
Page 198
196 UNDERSTANDING YOUR INSTRUMENT PANEL – If the volume level is between the minimum and Radio Off Function maximum values, the radio will come on at the This function makes it possible to set the radio switching same volume as before it was switched off. off mode by choosing between two methods.
UNDERSTANDING YOUR INSTRUMENT PANEL 197 • YES — The default parameters will be restored. Dur- Frequency Band Selection ing such operation, the wording “Resetting” appears With the Radio mode active, press the FM or AM tuner on the display. At the end of the operation, the source button briefly and repeatedly to select the desired recep- does not change and the previous situation will be tion band.
198 UNDERSTANDING YOUR INSTRUMENT PANEL • 15 in SAT (if so equipped) (5 SATA, 5 SATB, 5 SATC) Manual Tuning This is used to manually search for stations in the To listen to a preset station, select the desired frequency preselected band.
Page 201
UNDERSTANDING YOUR INSTRUMENT PANEL 199 of sight of the antenna will cause decreased performance. logos are trademarks of SiriusXM Radio Inc. and its Larger luggage items should be placed as far from the subsidiaries. SiriusXM Radio requires a subscription, antenna as possible. Do not place items directly on or sold separately after trial subscription included with above the antenna.
Page 202
Following expiration of the free services, it will be necessary to access the information on the Neither SIRIUS nor FIAT is responsible for any Subscription Information screen in order to re-subscribe. errors in accuracies in the SIRIUS data services or its Press the UP/DOWN button to scroll through the Menu use in vehicles.
SiriusXM and all related marks and logos are trademarks of The following are instructions for retrieving the Elec- SiriusXM Radio Inc. and its subsidiaries. SiriusXM Radio tronic Serial Number (ESN) from FIAT 500 NAFTA model requires a subscription, sold separately after trial subscrip- radios: tion included with vehicle purchase.
Page 204
202 UNDERSTANDING YOUR INSTRUMENT PANEL CD Player Selection CD Loading/Ejecting To activate the CD player built into the equipment, To load the CD, insert it gently into the slot to activate the proceed as follows: motorized loading system, which will position it cor- rectly.
Page 205
UNDERSTANDING YOUR INSTRUMENT PANEL 203 If the CD is not removed from the radio, it will automati- Display Information cally be reloaded about 20 seconds later but will not When the CD player is operating, information will ap- resume playing until the MEDIA button is pushed to pear on the display with the following meaning: select the CD mode.
204 UNDERSTANDING YOUR INSTRUMENT PANEL Track Fast Forward/Rewind MP3 Mode Keep the button pushed down to fast forward the In addition to playing regular audio CDs, the radio is also selected track and keep the button pushed down to enabled to play CDROMs on which compressed audio fast rewind the track.
Page 207
UNDERSTANDING YOUR INSTRUMENT PANEL 205 • The sampling frequencies that can be reproduced are: NOTE: When the function is activated the radio may take 44.1 kHz, stereo (from 96 to 320 kbit/s) – 22.05 kHz, a few seconds to start playing. While checking the disc mono or stereo (from 32 to 80 kbit/s).
206 UNDERSTANDING YOUR INSTRUMENT PANEL Selection Of Next/Previous Folder • If the MP3 files on a CD-ROM are structured in sub-folders their structure is compressed to a single Push the button to select a next folder or the level structure, where the sub-folders are taken to the button to select the previous folder.
UNDERSTANDING YOUR INSTRUMENT PANEL 207 CD Player Operating Instructions — Hands-Free Phone The CD Does Not Play: Refer to the appropriate “BLUE&ME™ User’s Manual” for further information. The CD is dirty. Clean the CD. Personal/Portable Navigation Device (PND) The CD is scratched. Try using another CD. A Personal/Portable Navigation Device (PND) is avail- The CD Can Not Be Loaded: able as optional equipment for this vehicle, refer to the...
208 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. USB/AUX Port 1 — Auxiliary Cable Jack 2 — USB Connector Refer to the appropriate Blue&Me™...
UNDERSTANDING YOUR INSTRUMENT PANEL 209 The right-hand control is a rocker-type switch with a Radio Operation pushbutton in the center and controls the volume and Pushing the top of the switch will “Seek” up for the next mode of the sound system. Pushing the top of the rocker listenable station and pushing the bottom of the switch switch will increase the volume, and pushing the bottom will “Seek”...
210 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Do not use solvents such as benzene, thinner, cleaners, Operating Instructions — Hands-Free Phone or anti-static sprays. (If Equipped) Refer to the appropriate Blue&Me™ User’s Manual for 5. Store the disc in its case after playing. further information.
UNDERSTANDING YOUR INSTRUMENT PANEL 211 RADIO OPERATION AND MOBILE PHONES Manual Heating And Air Conditioning Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the mobile phone antenna.
Page 214
212 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Temperature Control NOTE: • Continuous use of the Recirculation mode may make Rotate this control to regulate the temperature of the air the inside air stuffy and window fogging may occur. inside the passenger compartment. Rotating the dial to Extended use of this mode is not recommended.
Page 215
UNDERSTANDING YOUR INSTRUMENT PANEL 213 • Panel require extra heat to the windshield. This setting is Air is directed through the outlets in the good for maintaining comfort while reducing mois- instrument panel. These outlets can be ad- ture on the windshield. justed to direct airflow.
214 UNDERSTANDING YOUR INSTRUMENT PANEL MAX A/C For maximum cooling, use the A/C and recirculation modes at the same time. ECONOMY MODE If economy mode is desired, push the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature.
Page 217
UNDERSTANDING YOUR INSTRUMENT PANEL 215 2. A/C Button are selected. This allows the front occupants to control the volume of air circulated in the vehicle and cancel the Push and release to change the current Air Conditioning AUTO mode. (A/C) setting. Performing this function will cause the The operator can also select the direction of the airflow ATC to switch into manual mode.
Page 218
216 UNDERSTANDING YOUR INSTRUMENT PANEL and side window demist outlets. When the defrost but- NOTE: The center instrument panel outlets can be aimed ton is selected, the blower level will increase. Use Defrost so that they are directed toward the rear seat passengers mode with maximum temperature settings for best wind- for maximum airflow to the rear.
Page 219
UNDERSTANDING YOUR INSTRUMENT PANEL 217 11. Climate Control ON/OFF Button outlets. If Economy mode is desired, push the A/C button to turn off the A/C mode in the ATC display and Push and release to turn the Climate Control ON or OFF. deactivate the A/C system.
Page 220
218 UNDERSTANDING YOUR INSTRUMENT PANEL this button is selected. Push the button a second time to 2. Next, adjust the temperature you would like the system to maintain by adjusting the temperature con- turn off the Recirculation mode LED and allow outside trol buttons.
UNDERSTANDING YOUR INSTRUMENT PANEL 219 Manual Operation Window Fogging The system allows for manual selection of blower speed, Windows will fog on the inside when the humidity inside air distribution mode, A/C status and recirculation con- the vehicle is high. This often occurs in mild or cool trol.
Page 222
220 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Automatic Temperature Controls (ATC) will au- Winter Operation tomatically adjust the climate control settings to reduce When operating the system during the winter months, or eliminate window fogging on the front windshield. make sure the air intake, located directly in front of the When this occurs, recirculation will be unavailable.
Page 223
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Operating Tips Chart...
STARTING AND OPERATING 227 STARTING PROCEDURES Manual Transmission — If Equipped Before starting your vehicle, adjust your seat, adjust both Apply the parking brake, place the shift lever in NEU- inside and outside mirrors, and fasten your seat belts. TRAL, and press the clutch pedal before starting the vehicle.
228 STARTING AND OPERATING Turn the ignition switch to the AVV/ACC (START) CAUTION! position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition Use of the recommended SAE 5W-40 synthetic en- switch to the STOP (OFF/LOCK) position, wait 10 to 15 gine oil and adhering to the prescribed oil change seconds, then repeat the “Normal Starting”...
STARTING AND OPERATING 229 3. If the engine fails to start within ten seconds, cycle the If Engine Fails To Start ignition to the STOP (OFF/LOCK) position, wait five seconds to allow the starter to cool, then repeat the WARNING! Extended Park Starting procedure.
230 STARTING AND OPERATING After Starting MANUAL TRANSMISSION — IF EQUIPPED The idle speed will automatically decrease as the engine Five-Speed Manual Transmission warms up. WARNING! Turbocharger “Cool Down” You or others could be injured if you leave the This vehicle is equipped with an after-run pump to cool vehicle unattended without having the parking the turbocharger after the engine is shut off.
Page 233
STARTING AND OPERATING 231 Use each gear in numerical order; do not skip a gear. Be sure the transmission is in first gear, not third, when starting from a standing position. Damage to the clutch can result from starting in third gear. For most city driving, you will find it easier to use only the lower gears.
232 STARTING AND OPERATING Recommended Shift Speeds Downshifting To use your manual transmission for optimal fuel Proper downshifting will improve fuel economy and economy, it should be upshifted as listed in the following prolong engine life. table. CAUTION! Manual Transmission Recommended Shift Speeds If you skip a gear while downshifting or downshift Units In mph (km/h) at too high of a vehicle speed, these conditions may...
STARTING AND OPERATING 233 When turning a corner or driving up a steep grade, NOTE: You must press and hold the brake pedal while downshift early so that the engine will not be overbur- shifting out of PARK. dened. WARNING! AUTOMATIC TRANSMISSION —...
234 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.
STARTING AND OPERATING 235 OFF (key removal) position. The key can only be re- The electronically-controlled transmission provides a moved from the ignition when the ignition is in the precise shift schedule. The transmission electronics are LOCK/OFF position, and once removed, the transmis- self-calibrating;...
236 STARTING AND OPERATING Only shift from DRIVE to PARK or REVERSE when the instrument cluster. Move the shift lever to the right (into accelerator pedal is released and the vehicle is stopped. the DRIVE [D] position) for access to PARK, REVERSE, Be sure to keep your foot on the brake pedal when and NEUTRAL.
Page 239
STARTING AND OPERATING 237 When parking on a level surface, you may shift the WARNING! (Continued) transmission into PARK first, and then apply the parking • Your vehicle could move and injure you and others brake. if it is not completely in PARK. Check by trying to When parking on a hill, apply the parking brake before move the shift lever out of PARK with the brake shifting the transmission to PARK, otherwise the load on...
Page 240
238 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.
Page 241
STARTING AND OPERATING 239 • Look at the transmission gear position display and CAUTION! verify that it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 242
240 STARTING AND OPERATING DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the smoothest upshifts and down- ignition to coast down a hill. These are unsafe shifts, and the best fuel economy.
Page 243
STARTING AND OPERATING 241 If the transmission temperature exceeds normal operating PARK, REVERSE, and NEUTRAL will continue to oper- limits, the transmission controller will expand the range of ate. The Malfunction Indicator Light (MIL) may be illu- torque converter clutch engagement. This is done to prevent minated.
242 STARTING AND OPERATING NOTE: Even if the transmission can be reset, we recom- Operation mend that you visit your authorized dealer at your When the shift lever is in the AutoStick position (beside earliest possible convenience. Your authorized dealer has the Drive position), it can be moved forward and rear- diagnostic equipment to determine if the problem could ward.
Page 245
STARTING AND OPERATING 243 • The transmission will automatically downshift to first • Transmission shifting will be more noticeable when gear when coming to a stop. After a stop, the driver AutoStick is engaged. should manually upshift (+) the transmission as the •...
244 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
STARTING AND OPERATING 245 DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Cautions safety and prevent damage to your vehicle.
Page 248
246 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Driving through standing water may cause damage • Always check the depth of the standing water to your vehicle’s drivetrain components. Always before driving through it. Never drive through inspect your vehicle’s fluids (i.e., engine oil, trans- standing water that is deeper than the bottom of mission, axle, etc.) for signs of contamination (i.e., the tire rims mounted on the vehicle.
STARTING AND OPERATING 247 If the Steering icon is displayed and the “POWER STEER- POWER STEERING ING SYSTEM OVER TEMP” message is displayed on the The electric power steering system will give you good EVIC screen, they indicate that extreme steering maneu- vehicle response and increased ease of maneuverability vers may have occurred which caused an over tempera- in tight spaces.
248 STARTING AND OPERATING NOTE: • Even if the power steering assistance is no longer operational, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at low speeds and during parking maneuvers.
Page 251
STARTING AND OPERATING 249 should always be applied whenever the driver is not in WARNING! (Continued) the vehicle. • Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake WARNING! failure and a collision. •...
250 STARTING AND OPERATING SPORT MODE Manual Transmission — If Equipped In Sport mode, the engine is more responsive to the throttle pedal, and provides more maximum torque by increasing turbo boost pressure. Steering feedback is improved, and steering effort is slightly higher. This driving mode is useful for spirited driving.
STARTING AND OPERATING 251 Automatic Transmission — If Equipped The Sport mode increases steering feedback to the driver with slight increase in effort and changes the transmis- sion shift schedules for more aggressive shifting. This driving mode is useful while driving on twisty roads where more steering precision is desired in spirited cornering.
252 STARTING AND OPERATING BRAKE SYSTEM ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with dual hydraulic brake Your vehicle is equipped with a advanced electronic systems. If either of the two hydraulic systems loses brake control system that includes the Anti-Lock Brake normal capability, the remaining system will still func- System (ABS), Brake Assist System (BAS), Traction Con- tion.
Page 255
STARTING AND OPERATING 253 The ABS includes an amber ABS Warning Light. When WARNING! (Continued) the light is illuminated, the ABS is not functioning. The • The ABS cannot prevent collisions, including those system reverts to standard non-anti-lock brakes. Turning resulting from excessive speed in turns, following the ignition Off and On again may reset the ABS if the another vehicle too closely, or hydroplaning.
254 STARTING AND OPERATING Brake Assist System (BAS) WARNING! The BAS is designed to optimize the vehicle’s braking • The Brake Assist System (BAS) cannot prevent the capability during emergency braking maneuvers. The natural laws of physics from acting on the vehicle, system detects an emergency braking situation by sens- nor can it increase the traction afforded by prevail- ing the rate and amount of brake application and then...
STARTING AND OPERATING 255 wheel(s) and engine power is reduced to provide en- short period of time, the system will release brake hanced acceleration and stability. A feature of the TCS pressure and the vehicle will roll down the hill. The system, Brake Limited Differential (BLD), functions simi- system will release brake pressure in proportion to the lar to a limited slip differential and controls the wheel...
256 STARTING AND OPERATING Electronic Stability Control (ESC) WARNING! The Electronic Stability Control (ESC) system enhances There may be situations on minor hills with a loaded directional control and stability of the vehicle under vehicle, or while pulling a trailer, when the system various driving conditions.
Page 259
STARTING AND OPERATING 257 ESC Off Switch (Automatic Transmission) ESC Off Switch (Manual Transmission) NOTE: The ESC Off switch is located left of the steering column (Manual Transmission Only).
Page 260
258 STARTING AND OPERATING ESC Operating Modes WARNING! The ESC system has three available operating modes. The Electronic Stability Control (ESC) cannot pre- Full On vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by This is the normal operating mode for ESC.
Page 261
STARTING AND OPERATING 259 To turn ESC on again, momentarily press the switch mode, all TCS and ESC stability features are turned OFF, again. This will restore the normal ESC On mode of except for the limited slip feature described in the TCS operation.
260 STARTING AND OPERATING Malfunction Indicator Light begins to flash during accel- ESC Activation/Malfunction Indicator Light And eration, ease up on the accelerator and apply as little ESC OFF Indicator Light throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions.
STARTING AND OPERATING 261 NOTE: TIRE SAFETY INFORMATION Tire Markings • P (Passenger) — Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 264
262 STARTING AND OPERATING • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall.
Page 265
STARTING AND OPERATING 263 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
264 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 267
STARTING AND OPERATING 265 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
266 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
STARTING AND OPERATING 267 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (B-Pillar) Example Tire Placard Location (Door)
Page 270
268 STARTING AND OPERATING Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4.
Page 271
STARTING AND OPERATING 269 NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occu- axles must not be exceeded. For further information on pants and cargo should never exceed XXX lbs or GAWRs, vehicle loading, and trailer towing, refer to XXX kg”...
Page 272
270 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
272 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 275
STARTING AND OPERATING 273 Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
274 STARTING AND OPERATING Inflation pressures specified on the placard are always Tire Inflation Pressures “cold tire inflation pressure”. Cold tire inflation pressure The proper cold tire inflation pressure is listed on the is defined as the tire pressure after the vehicle has not driver’s side B-Pillar or rear edge of the driver’s side door.
STARTING AND OPERATING 275 inflation pressure should be increased by 3 psi (21 kPa), WARNING! which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) tires could cause them to fail.
276 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, • The tire has not been driven on when flat. Summer, Fall and Winter).
Page 279
STARTING AND OPERATING 277 Summer tires do not contain the all season designation or If you need snow tires, select tires mountain/snowflake symbol on the tire sidewall. Use equivalent in size and type to the origi- Summer tires only in sets of four; failure to do so may nal equipment tires.
278 STARTING AND OPERATING Run Flat Tires — If Equipped Spare Tires — If Equipped Run Flat tires allow you the capability to drive 50 miles NOTE: For vehicles equipped with Tire Service Kit (80 km) at 50 mph (80 km/h) after a rapid loss of inflation instead of a spare tire, please refer to “Tire Service Kit”...
Page 281
STARTING AND OPERATING 279 rotation for your vehicle. If your vehicle has this option, Do not install a wheel cover or attempt to mount a refer to an authorized tire dealer for the recommended conventional tire on the compact spare wheel, since the tire rotation pattern.
280 STARTING AND OPERATING front or rear axle of your vehicle, but it is not. This spare WARNING! tire may have limited tread life. When the tread is worn to the tread wear indicators, the temporary use full size Limited-use spares are for emergency use only. In- spare tire needs to be replaced.
STARTING AND OPERATING 281 Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
282 STARTING AND OPERATING worn to the tread wear indicators, the tire should be tread life. Rotation of these tires per the vehicle main- replaced. Refer to “Replacement Tires” in this section for tenance schedule is highly recommended. further information. WARNING! Life Of Tire Tires and the spare tire should be replaced after six...
Page 285
STARTING AND OPERATING 283 wear and correct cold tire inflation pressures. The manu- It is recommended you contact your authorized tire facturer strongly recommends that you use tires equiva- dealer or original equipment dealer with any questions lent to the originals in size, quality and performance you may have on tire specifications or capability.
284 STARTING AND OPERATING TIRE CHAINS (TRACTION DEVICES) WARNING! (Continued) Due to limited clearance, tire chains or traction devices • Never use a tire with a smaller load index or are not recommended. capacity, other than what was originally equipped on your vehicle.
Page 287
STARTING AND OPERATING 285 These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on all season type tires. Rotation will increase tread life, help to maintain mud, snow and wet traction levels, and contribute to a smooth, quiet ride.
286 STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if TIRE PRESSURE MONITORING SYSTEM (TPMS) the tire pressure falls below the low pressure warning The Tire Pressure Monitor System (TPMS) will warn the limit for any reason, including low temperature effects, or driver of a low tire pressure based on the vehicle recom- natural pressure loss through the tire.
Page 289
STARTING AND OPERATING 287 For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) tire pressure of 30 psi (207 kPa). If the ambient temperature is 68° F • The TPMS has been optimized for the original (20°...
288 STARTING AND OPERATING NOTE: • Seasonal temperature changes will affect tire pressure, and the TPMS will monitor the actual tire pressure in • The TPMS is not intended to replace normal tire care the tire. and maintenance, or to provide warning of a tire failure or condition.
Page 291
STARTING AND OPERATING 289 The TPMS consists of the following components: vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. • Receiver Module. Check TPMS Warnings • Four Tire Pressure Monitoring Sensors. The Tire Pressure Monitoring Telltale Light will flash on •...
Page 292
290 STARTING AND OPERATING 3. Snow or ice around the wheels or wheel housings. Monitoring Telltale Light will flash on and off for 75 seconds and then remain on solid and the Service Tire 4. Using tire chains on the vehicle. Pressure Monitoring System message will be dis- 5.
STARTING AND OPERATING 291 Enhanced TPM System The TPMS consists of the following components: When the vehicle is equipped with an enhanced TPM • Receiver module system, the driver can view text messages showing the • Four Tire Pressure Monitoring Sensors actual tire pressure value by position by selecting the tire pressure menu command in the instrument cluster.
Page 294
292 STARTING AND OPERATING system receives the updated tire pressures, the system will automatically update and the “Tire Pressure Moni- toring Telltale Light” will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) in order for the TPMS to receive this informa- tion.
Page 295
STARTING AND OPERATING 293 A system fault can occur due to any of the following: 1. Signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing aftermarket window tinting that contains materials that may block radio wave signals.
Page 296
294 STARTING AND OPERATING shown. This indicates that the pressure values are still Telltale Light” will flash on and off for 75 seconds and being received from the TPM sensors but they may not be then remain on solid. In addition, the EVIC will located in the correct vehicle position.
STARTING AND OPERATING 295 General Information FUEL REQUIREMENTS This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the This engine is designed to meet all emis- following conditions: sion regulations and provide satisfactory fuel economy and performance when us- •...
296 STARTING AND OPERATING Fuels blended with these oxygenates may be used in Reformulated Gasoline your vehicle. Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline”. CAUTION! Reformulated gasoline contain oxygenates and are spe- cifically blended to reduce vehicle emissions and im- Do not use gasoline containing Methanol or E-85 prove air quality.
STARTING AND OPERATING 297 If a Non-FFV vehicle is inadvertently fueled with E-85 MMT. Gasoline blended with MMT reduces spark plug fuel, the engine will have some or all of these symptoms: life and reduces emissions system performance in some vehicles.
298 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 301
STARTING AND OPERATING 299 Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 302
300 STARTING AND OPERATING ADDING FUEL CAUTION! Fuel Filler Cap (Gas Cap) • Damage to the fuel system or emission control The gas cap is located on the passenger side of the system could result from using an improper fuel vehicle.
Page 303
STARTING AND OPERATING 301 • If the gas cap is not tightened properly, the MIL will WARNING! come on. Be sure the gas cap is tightened every time the vehicle is refueled. • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is Loose Fuel Filler Cap Message being filled.
Page 304
302 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground Manual Transmission Automatic Transmission Flat Tow NONE Transmission in NEU- NOT ALLOWED TRAL Dolly Tow Front Rear NOT ALLOWED NOT ALLOWED On Trailer...
Page 305
STARTING AND OPERATING 303 This vehicle may be towed on a flatbed or vehicle trailer CAUTION! provided all four wheels are OFF the ground. DO NOT flat tow any vehicle equipped with an This vehicle may also be towed using a tow dolly (with automatic transmission.
Page 307
WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...307 JACKING AND TIRE CHANGING — IF EQUIPPED ......320 IF YOUR ENGINE OVERHEATS .
Page 308
306 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE ....333 ▫ Automatic Transmission ....336 TOWING A DISABLED VEHICLE .
WHAT TO DO IN EMERGENCIES 307 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the radio. potential for overheating by taking the appropriate ac- tion.
308 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! (Continued) to cool. Never try to open a cooling system pressure Driving with a hot cooling system could damage cap when the radiator or coolant bottle is hot. your vehicle. If the pointer rises to the H (red) mark, the instrument cluster will sound a chime.
WHAT TO DO IN EMERGENCIES 309 Tire Service Kit Storage Tire Service Kit Components And Operation The Tire Service Kit is located under the front driver’s seat. Tire Service Kit Components 1 — Sealant Bottle 5 — Mode Select Knob 2 —...
310 WHAT TO DO IN EMERGENCIES Using The Mode Select Knob And Hoses Using The Power Button Your Tire Service Kit is equipped with the following Push and release the Power Button (4) once to symbols to indicate the air or sealant mode. turn On the Tire Service Kit.
Page 313
WHAT TO DO IN EMERGENCIES 311 from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the Tire Service Kit.
Page 314
312 WHAT TO DO IN EMERGENCIES WARNING! WARNING! (Continued) • Keep Tire Service Kit away from open flames or • Do not attempt to seal a tire on the side of the heat source. vehicle closest to traffic. Pull far enough off the •...
WHAT TO DO IN EMERGENCIES 313 on the ground. This will provide the best positioning WARNING! (Continued) of the kit when injecting the sealant into the deflated • Tire Service Kit Sealant solution contains latex. In tire and running the air pump. Move the vehicle as case of an allergic reaction or rash, consult a phy- necessary to place the valve stem in this position sician immediately.
Page 316
314 WHAT TO DO IN EMERGENCIES 4. Remove the cap from the valve stem and then screw NOTE: Sealant may leak out through the puncture in the the fitting at the end of the Sealant Hose (6) onto the tire. valve stem.
Page 317
WHAT TO DO IN EMERGENCIES 315 NOTE: If the Mode Select Knob (5) is on Air Mode and latch pillar (recommended pressure). Check the tire the pump is operating, air will dispense from the Air pressure by looking at the Pressure Gauge (3). Pump Hose (7) only, not the Sealant Hose (6).
Page 318
316 WHAT TO DO IN EMERGENCIES 3. Immediately disconnect the Sealant Hose (6) from the (D) Drive Vehicle: valve stem, reinstall the cap on the fitting at the end of Immediately after injecting sealant and inflating the tire, the hose, and place the Tire Service Kit in the vehicle drive the vehicle 5 miles (8 km) or 10 minutes to ensure storage location.
Page 319
WHAT TO DO IN EMERGENCIES 317 (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to “Whenever You Stop 1. Push the Power Button (4) to turn on Tire Service Kit to Use Tire Service Kit”...
Page 320
318 WHAT TO DO IN EMERGENCIES 5. Remove the Speed Limit sticker from the instrument 4. Clean any remaining sealant from the Tire Service Kit panel after the tire has been repaired. housing. 6. Replace the Sealant Bottle (1) and Sealant Hose (6) 5.
WHAT TO DO IN EMERGENCIES 319 **Use only your Authorized Dealer recommended lug WHEEL AND TIRE TORQUE SPECIFICATIONS nuts/bolts and clean or remove any dirt or oil before Proper lug nut/bolt torque is very important to ensure tightening. that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the Inspect the wheel mounting surface prior to mounting vehicle the lug nuts/bolts should be torqued using a...
320 WHAT TO DO IN EMERGENCIES Tighten the lug nuts/bolts in a star pattern until each WARNING! nut/bolt has been tightened twice. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered.
WHAT TO DO IN EMERGENCIES 321 Jack Location WARNING! (Continued) The jack and jack wrench tool are stowed in a bag under • Being under a jacked-up vehicle is dangerous. The the front driver’s seat. vehicle could slip off the jack and fall on you. You could be crushed.
322 WHAT TO DO IN EMERGENCIES Block both the front and rear of the Preparations For Jacking wheel diagonally opposite the jacking 1. Park the vehicle on a firm level surface, avoiding ice or position. For example, if changing the slippery areas.
WHAT TO DO IN EMERGENCIES 323 Jacking Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. Carefully follow these tire changing warnings to • Do not get under the vehicle when it is on a jack. If help prevent personal injury or damage to your you need to get under a raised vehicle, take it to a vehicle:...
Page 326
324 WHAT TO DO IN EMERGENCIES Jack Warning Label CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. Center Cap Removal 1. Remove the scissors jack and tool bag from under the NOTE: Before using the swivel wrench to remove the driver’s seat.
Page 327
WHAT TO DO IN EMERGENCIES 325 3. Loosen, but do not remove, the wheel bolts by turning them to the left one turn while the wheel is still on the ground. NOTE: There are front and rear jacking locations on each side of the body (as indicated by the triangular lift point symbol on the sill molding).
Page 328
326 WHAT TO DO IN EMERGENCIES 5. Using the swivel wrench, raise the vehicle by turning the jack screw to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained. Minimum tire lift provides maximum stabil- ity.
WHAT TO DO IN EMERGENCIES 327 bolts. To avoid the risk of forcing the vehicle off the JUMP-STARTING PROCEDURE jack, do not tighten the bolts fully until the vehicle has If your vehicle has a discharged battery, it can be jump- been lowered.
328 WHAT TO DO IN EMERGENCIES CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Preparations For Jump-Start The battery in your vehicle is located on the left side of the engine compartment.
WHAT TO DO IN EMERGENCIES 329 3. Remove the protective cover over the positive (+) bat- WARNING! tery post. To remove the cover pull upward on the cover. • Take care to avoid the radiator cooling fan when- 4. If using another vehicle to jump-start the battery, park ever the hood is raised.
Page 332
330 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in Do not connect the jumper cable to the negative (-) damage to the charging system of the booster vehicle post of the discharged battery. The resulting electri- or the discharged vehicle.
WHAT TO DO IN EMERGENCIES 331 6. Once the vehicle is started, remove the jumper cables FREEING A STUCK VEHICLE in the reverse sequence: If your vehicle becomes stuck in mud, sand or snow, it Disconnecting The Jumper Cables can often be moved using a rocking motion. Turn the steering wheel right and left to clear the area around the 1.
Page 334
332 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! Racing the engine or spinning the wheels may lead to • When “rocking” a stuck vehicle by shifting be- transmission overheating and failure. Allow the en- tween DRIVE/2nd gear and REVERSE, do not spin gine to idle with the transmission in NEUTRAL for at the wheels faster than 15 mph (24 km/h), or drive- least one minute after every five rocking-motion...
WHAT TO DO IN EMERGENCIES 333 SHIFT LEVER OVERRIDE WARNING! If a malfunction occurs and the shift lever cannot be Fast spinning tires can be dangerous. Forces gener- moved out of the PARK position, you can use the ated by excessive wheel speeds may cause damage, or following procedure to temporarily move the shift lever: even failure, of the axle and tires.
Page 336
334 WHAT TO DO IN EMERGENCIES 4. Push and maintain firm pressure on the brake pedal. 5. Insert a small screwdriver or similar tool into the access hole, and push and hold the override release lever in. 6. Move the shift lever to the NEUTRAL position. 7.
WHAT TO DO IN EMERGENCIES 335 TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The AUTOMATIC TRANS- MANUAL TRANSMIS- Ground MISSION SION Flat Tow NONE NOT ALLOWED If transmission is oper- able: •...
336 WHAT TO DO IN EMERGENCIES Proper towing or lifting equipment is required to prevent CAUTION! (Continued) damage to your vehicle. Use only tow bars and other • When securing the vehicle to a flatbed truck, do not equipment designed for this purpose, following equip- attach to front or rear suspension components.
WHAT TO DO IN EMERGENCIES 337 Manual Transmission CAUTION! • Vehicle can be flat towed (all four wheels on the • DO NOT flat tow any vehicle equipped with a ground) with the transmission in NEUTRAL. conventional automatic transmission. Damage to •...
Page 341
MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 1.4L TURBO ..341 ▫ Maintenance-Free Battery ....349 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .342 ▫ Air Conditioner Maintenance ... . .350 EMISSIONS INSPECTION AND MAINTENANCE ▫...
Page 342
340 MAINTAINING YOUR VEHICLE ▫ Appearance Care And Protection From ▫ Front Fog Lamps ..... .387 Corrosion ......370 ▫...
342 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 345
MAINTAINING YOUR VEHICLE 343 Indicator Light (MIL)” is functioning and is not on when 2. As soon as you cycle the ignition switch to the ON the engine is running, and that the OBD II system is position, you will see the Malfunction Indicator Light ready for testing.
344 MAINTAINING YOUR VEHICLE If your OBD II system is not ready, you should see your use of parts which are not quality-equivalent to genuine authorized dealer or repair facility. If your vehicle was parts for maintenance and repairs will not be covered by recently serviced or had a battery failure or replacement, the manufacturer’s warranty.
MAINTAINING YOUR VEHICLE 345 WARNING! CAUTION! You can be badly injured working on or around a • Failure to properly maintain your vehicle or per- motor vehicle. Only do service work for which you form repairs and service when necessary could have the knowledge and the proper equipment.
346 MAINTAINING YOUR VEHICLE the reading is at the low end of the indicated range will Engine Oil result in the oil level at the full end of the indicator range. Checking Oil Level To assure proper engine lubrication, the engine oil must CAUTION! be maintained at the correct level.
Page 349
MAINTAINING YOUR VEHICLE 347 Engine Oil Selection engine oil filler cap location, refer to “Engine Compart- ment” in “Maintaining Your Vehicle” for further informa- For best performance and maximum protection for tur- tion. bocharged engines under all types of operating condi- tions, the manufacturer recommends synthetic engine Materials Added To Engine Oil oils that are API Certified and meet the requirements of...
348 MAINTAINING YOUR VEHICLE Engine Oil Filter WARNING! The engine oil filter should be replaced with a new filter The air induction system (air cleaner, hoses, etc.) can at every engine oil change. provide a measure of protection in the case of engine Engine Oil Filter Selection backfire.
MAINTAINING YOUR VEHICLE 349 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
350 MAINTAINING YOUR VEHICLE test. Drive belt tension should also be checked at this CAUTION! time. • It is essential when replacing the cables on the WARNING! battery that the positive cable is attached to the positive post and the negative cable is attached to •...
Page 353
MAINTAINING YOUR VEHICLE 351 Refrigerant Recovery And Recycling HFO 1234yf CAUTION! — If Equipped Do not use chemical flushes in your air conditioning HFO 1234yf Air Conditioning Refrigerant is a hydro- system as the chemicals can damage your air condi- fluorocarbon (HFC) that is endorsed by the Environmen- tioning components.
Page 354
352 MAINTAINING YOUR VEHICLE The A/C air filter is located in the fresh air inlet on the 2. Pull the console closeout cover rearward to disengage lower right of center console. Perform the following the front retaining tab and remove the cover. procedure to replace the filter: 1.
Page 355
MAINTAINING YOUR VEHICLE 353 Air Filter Cover Screw Locations A/C Air Filter 4. Remove the A/C air filter by pulling it straight out of 5. Install the A/C air filter with the air filter position the housing. Take note of the air filter position indica- indicators pointing in the same direction as removal.
354 MAINTAINING YOUR VEHICLE should be wiped clean to remove dust and grit; after CAUTION! lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching The A/C air filter is identified with an arrow to components to ensure proper function.
Page 357
MAINTAINING YOUR VEHICLE 355 Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield.
356 MAINTAINING YOUR VEHICLE 3. Grab the bottom of the wiper blade and rotate it 4. Install the wiper blade pivot pin into the wiper blade forward to unsnap the blade pivot pin from the wiper holder at the end of the wiper arm, and firmly press blade holder.
MAINTAINING YOUR VEHICLE 357 exhaust system inspected each time the vehicle is raised WARNING! for lubrication or oil change. Replace as required. Commercially available windshield washer solvents WARNING! are flammable. They could ignite and burn you. Care must be exercised when filling or working around •...
Page 360
358 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure • The catalytic converter requires the use of un- proper catalyst operation and prevent possible catalyst leaded fuel only.
MAINTAINING YOUR VEHICLE 359 To minimize the possibility of catalytic converter dam- Cooling System age: WARNING! • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in • When working near the radiator cooling fan, dis- motion.
Page 362
360 MAINTAINING YOUR VEHICLE Coolant Checks If the engine coolant (antifreeze) is dirty or contains visible sediment, have an authorized dealer clean and Check engine coolant (antifreeze) protection every 12 flush with OAT coolant (antifreeze) (conforming to months (before the onset of freezing weather, where MS.90032).
Page 363
MAINTAINING YOUR VEHICLE 361 CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 364
362 MAINTAINING YOUR VEHICLE important that you use the same engine coolant (OAT • Use only high purity water such as distilled or deion- coolant conforming to MS.90032) throughout the life of ized water when mixing the water/engine coolant your vehicle. (antifreeze) solution.
Page 365
MAINTAINING YOUR VEHICLE 363 • Mixing engine coolant (antifreeze) types is not recom- WARNING! mended and can result in cooling system damage. If HOAT and OAT coolant are mixed in an emergency, • The warning words “DO NOT OPEN HOT” on the have a authorized dealer drain, flush, and refill with cooling system pressure cap are a safety precaution.
364 MAINTAINING YOUR VEHICLE Disposal Of Used Engine Coolant As long as the engine operating temperature is satisfac- tory, the coolant bottle need only be checked once a Used ethylene glycol-based engine coolant (antifreeze) is month. a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal When additional engine coolant (antifreeze) is needed to rules for your community.
MAINTAINING YOUR VEHICLE 365 • Do not overfill the coolant expansion bottle. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the • Check the coolant freeze point in the radiator and in condenser clean.
Page 368
366 MAINTAINING YOUR VEHICLE when the pads are replaced. However, low fluid level WARNING! may be caused by a leak and a checkup may be needed. Riding the brakes can lead to brake failure and NOTE: If your vehicle is equipped with a manual possibly a collision.
Page 369
MAINTAINING YOUR VEHICLE 367 WARNING! WARNING! (Continued) cause it to boil unexpectedly during hard or pro- • Use only manufacturer’s recommended brake longed braking, resulting in sudden brake failure. fluid. Refer to “Fluids, Lubricants, And Genuine This could result in a collision. Parts”...
368 MAINTAINING YOUR VEHICLE Add fluid, if necessary, to maintain the proper level. CAUTION! Please see your authorized dealer for service. Use of improper brake fluids will affect overall Frequency Of Fluid Change clutch system performance. Improper brake fluids may damage the clutch system resulting in loss of Under normal operating conditions, the fluid installed at clutch function and the ability to shift the transmis- the factory will give satisfactory lubrication for the life of...
Page 371
MAINTAINING YOUR VEHICLE 369 the transmission fluid at the correct level using the Automatic Transmission Fluid (ATF) is an engineered recommended fluid. No chemical flushes should be used product and its performance may be impaired by supple- in any transmission; only the approved lubricant should mental additives.
370 MAINTAINING YOUR VEHICLE transmission has no dipstick. Your authorized dealer can required. However, change the fluid and filter if the fluid check your transmission fluid level using special service becomes contaminated (with water, etc.), or if the trans- tools. If you notice fluid leakage or transmission malfunc- mission is disassembled for any reason.
Page 373
MAINTAINING YOUR VEHICLE 371 What Causes Corrosion? • If insects, tar, or other similar deposits have accumu- lated on your vehicle, use MOPAR® Super Kleen Bug Corrosion is the result of deterioration or removal of and Tar Remover to remove. paint and protective coatings from your vehicle.
Page 374
372 MAINTAINING YOUR VEHICLE Special Care • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once a month.
Page 375
MAINTAINING YOUR VEHICLE 373 NOTE: If your vehicle is equipped with Dark Vapor or Stain Repel Fabric Cleaning Procedure — If Black Satin Chrome wheels DO NOT USE wheel cleaners, Equipped abrasives or polishing compounds. They will perma- Stain Repel seats may be cleaned in the following man- nently damage this finish and such damage is not cov- ner: ered by the New Vehicle Limited Warranty.
Page 376
374 MAINTAINING YOUR VEHICLE Interior Care WARNING! Use MOPAR® Total Clean to clean fabric upholstery and Do not use volatile solvents for cleaning purposes. carpeting. Many are potentially flammable, and if used in Use MOPAR® Total Clean to clean vinyl upholstery. closed areas they may cause respiratory harm.
Page 377
MAINTAINING YOUR VEHICLE 375 Glass Surfaces CAUTION! All glass surfaces should be cleaned on a regular basis Do not use Alcohol and Alcohol-based and/or Keton with MOPAR® Glass Cleaner, or any commercial based cleaning products to clean leather seats, as household-type glass cleaner.
Page 378
376 MAINTAINING YOUR VEHICLE Instrument Panel Bezels 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive CAUTION! cleaners. If soap is used, wipe clean with a clean damp rag.
MAINTAINING YOUR VEHICLE 377 FUSES WARNING! WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system • When replacing a blown fuse, always use an ap- periodically, checking for cuts, frays, or loose parts. propriate replacement fuse with the same amp Damaged parts must be replaced immediately.
378 MAINTAINING YOUR VEHICLE WARNING! (Continued) • If a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact an authorized dealer. Interior Fuses The interior fuse panel is part of the Body Control Module (BCM) and is located on the driver’s side under the instrument panel.
Page 381
MAINTAINING YOUR VEHICLE 379 Cavity Vehicle Fuse Number Mini Fuse Description 20 Amp Yellow Central Door Locking 10 Amp Red Diagnostic Socket, Car Radio, Climate Control System 20 Amp Yellow Bi-Directional Washer 20 Amp Yellow Passenger Power Window 7.5 Amp Brown Left Low Beam, Headlamp Leveling 7.5 Amp Brown Airbag...
380 MAINTAINING YOUR VEHICLE Underhood Fuses The Front Distribution Unit is located on the right side of the engine compartment, next to the battery. To access the fuses, press the release tabs and remove the cover. Front Distribution Unit The ID number of the electrical component correspond- ing to each fuse can be found on the back of the cover.
Page 383
MAINTAINING YOUR VEHICLE 381 Cavity Maxi Fuse Mini Fuse Description 60 Amp Blue – Body Controller 20 Amp Yellow – Audio Amplifier 20 Amp Yellow – Ignition Switch 40 Amp Orange – Anti-Lock Brake Pump 70 Amp Tan – Electric Power Steering 20 Amp Yellow –...
Page 384
382 MAINTAINING YOUR VEHICLE Cavity Maxi Fuse Mini Fuse Description – 7.5 Amp Brown Transmission – 25 Amp Clear Powertrain (Multiair – If Equipped) – 15 Amp Blue Powertrain – 15 Amp Blue Powertrain – 5 Amp Tan Powertrain (Multiair – If Equipped) –...
MAINTAINING YOUR VEHICLE 383 Cavity Maxi Fuse Mini Fuse Description 30 Amp Green – Rear Defroster – 5 Amp Tan Rear Defroster – 5 Amp Tan Heated Mirrors – If Equipped • Disconnect the negative cable from the battery. VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 •...
384 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS Interior Bulbs Bulb Number Overhead Lamp Courtesy Lamp Exterior Bulbs Bulb Number Front Low and High Beam Headlamp HIR2LL Front Parking/Daytime Running Lamps W21/5W Front Fog Lamps H11LL Front Side Marker Lamps Front Turn Signal Lamps WY21W Side Direction Lamps WY5W...
MAINTAINING YOUR VEHICLE 385 Bulb Number Rear Tail and Stop Lamps P21/5W Rear Backup Lamps W16W Center High Mounted Stop Lamp License Plate Lamps LED (See Authorized dealer) NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized dealer. If a bulb needs to be replaced, visit your authorized dealer or refer to the applicable Service Manual.
386 MAINTAINING YOUR VEHICLE 3. Remove the plastic cap from the back of the lamp Front Turn Signal, Parking And Daytime Running housing. Lamps 1. Turn the steering wheel completely to the left or right. 4. Rotate bulb/socket counter-clockwise. 2. Open the wheel housing access door. 5.
MAINTAINING YOUR VEHICLE 387 Front Fog Lamps Rear Tail, Stop, Backup And Turn Signal Lamps To replace the front fog lights, see your authorized dealer. 1. Open the liftgate. 2. Remove the two screws and remove the tail lamp Front/Rear Side Marker Lamps assembly.
388 MAINTAINING YOUR VEHICLE 3. Remove four screws and separate the backplate from 3. Disconnect the electric connector. the lamp housing. 4. Press the retaining device and open the bulb holder. 4. Remove the tail, stop, or turn signal bulbs by pushing 5.
390 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/ 150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-90032. Engine Oil We recommend you use API Certified SAE 5W-40 Full Synthetic Engine Oil, meeting the requirements of Chrysler Material Standard MS-12991.
Page 393
MAINTAINING YOUR VEHICLE 391 CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
392 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Manual Transmission – If Equipped We recommend you use MOPAR® C635 DDCT/MTX Transmission Fluid Automatic Transmission – If Equipped Use only MOPAR® AW-1 Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission.
Page 396
394 MAINTENANCE SCHEDULES Your authorized dealer will reset the oil change indicator MAINTENANCE SCHEDULE message after completing the scheduled oil change. If a Your vehicle is equipped with an automatic oil change scheduled oil change is performed by someone other indicator system.
Page 397
MAINTENANCE SCHEDULES 395 Once A Month Or Before A Long Trip: At Every Oil Change Interval As Indicated By Oil Change Indicator System: Check engine oil level Change oil and filter. Check windshield washer fluid level Rotate the tires. Rotate at the first sign of irregular Check the tire inflation pressures and look for unusual wear, even if it occurs before the oil indicator sys- wear or damage...
Page 398
396 MAINTENANCE SCHEDULES Maintenance Chart Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary. Inspect brake linings, replace if needed. Inspect parking brake function, adjust as neces- sary.
Page 399
MAINTENANCE SCHEDULES 397 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Replace engine air filter. Replace the spark plugs. ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Inspect and replace PCV valve if necessary.
Page 400
398 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 401
DEPARTMENT OF TRANSPORTATION UNIFORM ▫ FIAT Customer Center ....401 TIRE QUALITY GRADES ....405 ▫...
400 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
• If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer. FIAT Canada Customer Center They want to know if you need assistance. P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: 1-800- •...
402 IF YOU NEED CONSUMER ASSISTANCE has access to a TDD or a conventional teletypewriter manufacturer’s Service Contract National Customer (TTY) in the United States, can communicate with the Hotline at 1-800-521-9922 (Canadian residents, call (800) manufacturer by dialing 1-800-380-CHRY. 465-2001 English / (800) 387-9983 French).
IF YOU NEED CONSUMER ASSISTANCE 403 REPORTING SAFETY DEFECTS WARNING! In The 50 United States And Washington, D.C. Engine exhaust (internal combustion engines only), If you believe that your vehicle has a defect that could some of its constituents, and certain vehicle compo- cause a crash or cause injury or death, you should nents contain, or emit, chemicals known to the State immediately inform the National Highway Traffic Safety...
404 IF YOU NEED CONSUMER ASSISTANCE You can also obtain other information about motor NOTE: A street address is required when ordering vehicle safety from http://www.safercar.gov. manuals (no P.O. Boxes). Service Manuals In Canada If you believe that your vehicle has a safety defect, you These comprehensive Service Manuals provide the infor- should contact the Customer Service Department imme- mation that students and professional technicians need in...
IF YOU NEED CONSUMER ASSISTANCE 405 problems the first time, using step-by-step troubleshoot- • Call toll free at: ing and drivability procedures, proven diagnostic tests 1-800-890-4038 (U.S.) and a complete list of all tools and equipment. 1-800-387-1143 (Canada) Owner’s Manuals These Owner’s Manuals have been prepared with the •...
406 IF YOU NEED CONSUMER ASSISTANCE All passenger car tires must conform to Federal safety Traction Grades requirements in addition to these grades. The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire’s ability to stop on Treadwear wet pavement, as measured under controlled conditions The Treadwear grade is a comparative rating, based on...
IF YOU NEED CONSUMER ASSISTANCE 407 Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, The temperature grade for this tire is established for representing the tire’s resistance to the generation of heat a tire that is properly inflated and not overloaded. and its ability to dissipate heat, when tested under Excessive speed, under-inflation, or excessive load- controlled conditions on a specified indoor laboratory...
Page 418
416 INDEX Hazard Instrument Panel And Controls ....143 Driving Through Flowing, Rising, Or Shallow Stand- Instrument Panel Cover .....375 ing Water .
Page 424
422 INDEX Sun Roof .......130 Pressure Monitor System (TPMS) ... .286 Supplemental Restraint System - Air Bag .
Page 425
INDEX 423 Traction Control ......254 Untwisting Procedure, Seat Belt ....34 Trailer Towing .
Page 426
424 INDEX Window Fogging ......219 Windows ....... .23 Power .
Page 427
INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 428
FCA US LLC 15FX24-126-AD Fourth Edition Printed in U.S.A.