Table of Contents
Advertisement
WARNING
Be very careful when working in the
engine compartment when the engine is
hot: you may get burned. Remember that the
fan may start up if the engine is hot: this could
injure you. Scarves, ties and other loose clothing
might be pulled by moving parts.
The used engine oil and the filter that has
been replaced contain substances that
are harmful to the environment.To change
the oil and filters, we advise you to contact a Fiat
Dealership.
ENGINE COOLANT
The coolant level must be checked when the engine
is cold and must be between the MIN and MAX
marks on the reservoir.
fig. 230 - 180 MultiJet Power versions
If the level is low, slowly pour a mixture of 50%
demineralised water and 50% PARAFLUUP by
PETRONAS LUBRICANTS through the filler neck A
fig. 231 - fig. 232 until the level is close to MAX.
A 50-50 mixture of PARAFLUUP and distilled water
gives freeze protection up to –35°C.
For particularly harsh climate conditions, a mixture
of 60% PARAFLUUP and 40% demineralised water is
recommended.
PARAFLU
engine cooling system. Use fluid of the
same type as that contained in the cooling
system for any top-ups. PARAFLU
mixed with any other type of fluid. If this
happens, do not start the engine and contact a
Fiat Dealership.
fig. 231 - 115 MultiJet versions
F0N0211
UP
antifreeze is used in the
UP
cannot be
F0N0532M
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
233
Advertisement
Table of Contents
