External Lights; Daylight Lights; Dipped Headlights/Side Lights; Main Beam Headlights - Fiat 500 C Owner's Handbook Manual

EXTERNAL LIGHTS

1
2
24
DAYTIME RUNNING
LIGHTS
7)
❒ For vehicles with the AUTO
function: with the key in the MAR
position and the ring turned to the
O position, the daytime running
lights switch on automatically.
❒ For vehicles with the AUTO function:
the daytime running lights are turned
on automatically by the dusk sensor
when the ring is in the AUTO position.
DIPPED HEADLIGHTS/
SIDE LIGHTS
❒ With key at MAR, turn the ring nut to
2. The warning light 3
on the
instrument panel will come on. When
the dipped beam headlights are on,
the daytime running lights switch off.
With the selector switch in the AUTO
position, the side lights and dipped beam
headlights are controlled by the dusk
sensor.
MAIN BEAM
HEADLIGHTS
❒ With the ring in the 2 position,
push the stalk forwards towards the
dashboard. The
the instrument panel will light.
❒ For vehicles with the AUTO
function: with the ring in the AUTO
position and the dipped beam
DVDF0S008c
headlights on, push the stalk
forwards toward the dashboard.
❒ They are deactivated by pulling the
stalk towards the steering wheel.
Flashing
❒ You can flash the beams pulling the
stalk toward the steering wheel
(unstable position).

PARKING LIGHTS

These lights can be turned on with the
starter switch in the STOP position or
with the key removed, by moving the
left stalk ring first to the
the AUTO position if the vehicle does
not have a dusk sensor) and then to
2
position .
The warning light
instrument panel. Repeat the same
operation to switch them off.

DIRECTION INDICATORS

Bring the stalk to the (stable) position:
❒ up a: activates the right direction
indicator;
❒ down b: activates the left direction
1
warning light on
indicator.
LANE CHANGE
FUNCTION
❒ Move the lever upwards or
downwards (unstable position) for
less than half a second and the
direction indicator will flash 3 times
to signal a lane change, then
immediately switch off
automatically.
FOLLOW ME HOME
This function allows the space
surrounding the car to be lit up for the
set period of time.
Activation
The "Follow Me Home" device is
position (or
activated by pulling the stalk fig. 25
towards the steering wheel, in addition
to the stroke end click.
3
lights on the
35