Table of Contents
Advertisement
❒ turn the ring nut C to the required position;
❒ turn knob B to required speed.
FAST PASSENGER COMPARTMENT
HEATING
For the fast heating of the passenger compartment,
proceed as follows:
❒ turn the ring nut A to the red section;
❒ start internal air recirculation by placing knob D
on
;
❒ turn ring nut C to
;
❒ turn knob B to 4
(max. fan speed).
Then use the controls to maintain the required
comfort conditions and turn the knob D to
turn the air recirculation off and to prevent misting.
IMPORTANT With a cold engine, you have to wait
for a few minutes to let the system fluid reach
optimum operating temperature.
FRONT WINDOW FAST DEMISTING/
DEFROSTING (WINDSCREEN AND SIDE
WINDOWS)
Proceed as follows:
❒ turn the ring nut A to the red section;
❒ stop internal air recirculation by placing knob D on
;
❒ turn ring nut C to
;
❒ turn knob B to 4
(max. fan speed).
IMPORTANT To guarantee rapid demisting/
defrosting, if an additional heater is present (under
the front or rear seat on Panorama and Combi
versions), if activated, deactivate it using the button F
(LED off ) located in the control panel fig. 49.
After demisting/defrosting, operate the controls to
restore the required comfort conditions.
Window demisting
In the event of considerable external moisture
and/or rain and/or large differences in temperature
inside and outside the passenger compartment,
perform the following preventive window demisting
procedure:
❒ turn the ring nut A to the red section;
to
❒ stop internal air recirculation by placing knob D on
;
fig. 49
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0N0500
47
Advertisement
Table of Contents
