Table of Contents
Advertisement
The maximum cover area of the camera is around 3
m in length and about 5.5 m in width fig. 109.
Important usage information
To clean the camera, it is advisable to use a
non-abrasive cloth when the protective glass is dirty
or iced over (on the outside). It is absolutely
necessary to avoid using any tool for cleaning as this
could scratch the glass.
It is also advisable to use a dry non-abrasive cloth
when cleaning the display. The dust that settles
on the display may be removed with special brushes.
Avoid using any detergent for cleaning.
The display glass could break in the event of impact.
In this case, do not touch the liquid crystal that
emerges from the display. If this occurs, quickly wash
the contaminated parts with soap and water.
fig. 109
USER INTERFACE
The display user interface consists of fig. 110:
❒ Brightness adjustment: 2 buttons;
❒ Backlight adjustment: 2 buttons;
❒ ON/OFF button: this allows images from the
camera to be seen even with reverse gear not
engaged.
The system makes it possible to return to the initial
configuration, keeping the ON/OFF button pressed
for approximately 3 seconds with the system
deactivated. In this case, the ON/OFF key flashes
twice to confirm the operation.
fig. 110
F0N0215
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0N0216
93
Advertisement
Table of Contents
