Table of Contents
Advertisement
To change a bulb, proceed as follows fig. 198:
KNOW YOUR
❒ open the rear swing door and then undo the two
VEHICLE
fixing screws A;
❒ disconnect the central electric connector B and
pull the lens unit outwards;
SAFETY
❒ unscrew the screws C fig. 199 using the
screwdriver provided and remove the bulb holder;
❒ remove the bulb D, E, F, G pushing it gently and
turning it anticlockwise ("bayonet" locking), then
STARTING AND
replace it;
DRIVING
❒ refit the bulb holder and tighten the screws C;
❒ reconnect the electrical connector B, correctly
WARNING LIGHTS
reposition the unit on the body of the vehicle
AND MESSAGES
and then tighten the fixing screws A.
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 198
204
fig. 199
F0N0851
F0N0088
Advertisement
Table of Contents
