External Lights; Daytime Running Lights; Dipped Beam Headlights / Side Lights; Main Beam Headlights - Fiat 500 C Owner's Handbook Manual

EXTERIOR LIGHTS
fig. 24
6)
1
2
24
DAYTIME RUNNING
LIGHTS
❒ With key in MAR-ON position and
ring nut turned to position O, the
daytime running lights switch on
automatically.
DIPPED BEAM
HEADLIGHTS AND SIDE
LIGHTS
❒ With key in MAR-ON position, turn
the ring nut to 2. The warning light
3
in the instrument panel comes
on. When the dipped beam
headlights are on, the daytime
running lights switch off.
MAIN BEAM
HEADLIGHTS
❒ With ring nut in position 2, push
the stalk forward toward the
dashboard. The warning light
the instrument panel will come on.
❒ They switch off when the lever is
pulled towards the steering wheel.
Flashing
❒ You can flash the beams pulling the
stalk toward the steering wheel
(unstable position).
DVDF0S008c

DIRECTION INDICATORS

Bring the stalk into (stable) position:
❒ up a: activates right direction
indicator;
❒ down b: activates left direction
indicator.
LANE CHANGE
FUNCTION
❒ Move the lever upwards or
downwards (unstable position) for
1
on
less than half a second and the
direction indicator will flash 3 times
to signal a lane change, then
immediately switch off
automatically.

FOLLOW ME HOME

This function allows the space
surrounding the car to be lit up for the
set period of time.
❒ With the ignition key in the STOP
position or extracted, pull the stalk
towards the steering wheel and
move it within 2 minutes of the
engine switching off.
❒ Each time the stalk is operated, the
lights stay on for an extra 30
seconds up to a maximum of 210
seconds.
29