Table of Contents
Advertisement
BATTERY DISCONNECTION FUNCTION
(DISCONNECTOR)
(for versions/markets, where provided)
The battery disconnection function is enabled with
the ignition key in the BATT position, as illustrated
on the dedicated plate located in the area illustrated
in fig. 82.
fig. 82
fig. 83
To turn the ignition key to BATT position, press
button A (red) fig. 83.
The battery will be disconnected, by interrupting the
earth lead, about 45 seconds after the key is turned
to the BATT position.
This 45 second period is necessary to:
❒ allow the driver to get out of the vehicle and lock
the doors using the remote control;
❒ guarantee that all the vehicle electrical systems
have been deactivated.
With the battery disconnected, access to the vehicle
will only be possible by unlocking the driver's door
using the mechanical lock.
To restore the battery connection, insert the ignition
key and turn it to MAR-ON; the vehicle can be
started normally at this point.
If the battery is disconnected, it may be necessary to
set certain electrical devices again (e.g. clock, date,
F0N0811
etc.).
F0N0810
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
81
Advertisement
Table of Contents
