AMX MXT-2001-PAN Installation & Hardware Reference Manual page 48

3. Thread the incoming Ethernet and USB cables through the surface opening (FIG. 43 and FIG. 44). Note that these figures
show a landscape panel but the installation of a portrait panel is essentially the same, other than the vertical orientation.
Leave enough slack in the wiring to accommodate any re-positioning of the panel.
FIG. 43 shows the MXD-1001 Backbox installation:
4X Installation Clamp
for Wall Thickness
.31 [12.0] to .98 [.25.0]
MXD-1001 Backbox Installation (Landscape)
FIG. 43
Modero X® Series G5 Touch Panels - Installation & Hardware Reference Manual
4X Knock-Outs
Remove for Cable
Routing as Needed
#4 Screws
Note:
Additional detailed installation and product drawings are available to view/download at www.amx.com
Installing Wall-Mount (MXD) Panels
48