Aastra DT692 User Manual page 122

USER GUIDE
21.3.5
21.4
122
Clear list in Charger
Note: This feature is applicable for DT692 only.
A parameter can be set via the WinPDM/CPDM3 that clears messaging
lists and call lists that have been stored in the handset. When the param-
eter is activated and the function has been downloaded to the handset,
the lists are deleted when placed in a charger. This can be useful during
administration of handsets for new users. See also Configuration
Manual, Aastra DT390/DT69x DECT Telephones,
Headset Profiles
In order to achieve optimal audio quality with the different headset types,
it is recommended that you select the corresponding profile. The default
setting is microphone on a boom, meaning that the audio is optimized for
using a headset with microphone on a boom.
To change the headset profile, do the following:
1. Press Menu, select
2. Select Headset and press Select
3. Select Mic on boom, Mic on cable or Hearing protection, and
press Select.
If the pre-configured headset profiles do not match the headset in use,
or if the audio quality is low, it is possible to configure a new headset
profile. This is done in WinPDM or CPDM3 by the system administrator.
, and press Select.
1424-EN/LZT 103 088 Uen H 2014-04-03