Rack Pdm Charger; Battery Pack Rack Charger - Aastra DT692 User Manual

23.3.3
23.3.4
1424-EN/LZT103 088 Uen H 2014-04-03
Using the desk PDM charger for software download and synchronization
of parameters is most often done by system administrators, and requires
that the charger is connected either to the LAN and CPDM3 or to a PC
with the WinPDM software application installed. For a short description
of CPDM3 and WinPDM, see 22.5 WinPDM and CPDM3 on page 132.
The desk PDM charger is connected to a PC through the USB or one of
the network connectors, see figure 20 on page 129. When you connect
the charger with a PC through one of the network connectors, the
charger acts as a switch, making it possible to connect the other
connector to the LAN.
Figure 20:Network and USB Connectors
Note: Network and USB connectors are used to connect the desk PDM
chargers to a PC running the WinPDM or to the LAN (not for
charging).

Rack PDM Charger

The rack PDM charger is used for charging several phones, as well as
for software download, and synchronization of parameters. The built in
power supply can charge up to six cordless phones at once.

Battery Pack Rack Charger

The battery pack rack charger is used for charging up to six spare
batteries.
I
NSTALLATION
129