Using The Ac Adaptor - Roberts Rambler Manual

Using the AC adaptor

1. Place your radio on a fl at surface.
2. Plug the mains adaptor into the DC input socket located on the rear
of your radio (marked 'DC') ensuring that the plug is pushed fully into
the socket.
3. Plug the other end of the mains adaptor into a standard mains socket
outlet and switch on the wall socket. The display will show 'WELCOME'
for a few seconds and '00:00' will be shown on the display.
Whenever the adaptor is used the batteries are automatically
disconnected.
The AC adaptor should be disconnected from the mains supply and
from the radio when not in use.
IMPORTANT: The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains adaptor should be removed from the mains
socket outlet completely.
Use only the mains adaptor provided with the product, or a genuine
replacement provided by Roberts Radio. The use of alternative adaptors
may invalidate the guarantee.
5
DC In