Operating Your Radio - Fm - Roberts Rambler Manual

Operating your radio - FM

1. Carefully extend the telescopic aerial. The aerial should be fully
extended and positioned vertically for optimum reception.
2. Press and release the On/Off button to switch on your radio.
3. Press and release the Mode button until the 'FM' mode is selected.
4. Rotate the Tuning/Select control clockwise and then press and
release the Auto Tune button. Your radio will scan in an upwards
direction (low frequency to high frequency) and stop automatically
when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update. The display will show
the frequency of the signal found. If the signal is strong enough and
there is RDS data present then the radio will display the station
name.
6. Rotate the Tuning/Select control anti-clockwise and then press
and release the Auto Tune button. Your radio will scan the FM
band in a downwards direction (high frequency to low frequency).
7. When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
8. Adjust the Volume to the required setting.
9. To switch off your radio press and release the On/Off button.
13
2,9
3
4,6
4,6