Roberts Rambler Manual page 23

14. Press and release the Tuning/Select control to enter the alarm month
setting. The alarm year will fl ash on the display.
15. Rotate the Tuning/Select control to choose the alarm year.
16. Press and release the Tuning/Select control to enter the setting. The
alarm source option will show on the display.
17. Rotate the Tuning/Select control to choose the desired alarm source
(DAB, FM, BUZZER).
If setting the alarms to the radio option, the radio alarm may be set to
the last listened radio station or any of the stations which have been
stored as presets.
Press and release the Tuning/Select control and then rotate the
control to choose either 'LAST' to wake up to the last listened radio
station or from a preset on the display.
Note: That you can only set the alarm to use a preset which has
already been stored. Please see 'Presetting stations' page 18.
18. Press and release the Tuning/Select control. The volume setting will
show on the display.
19. Rotate the Tuning/Select control to choose the desired alarm volume.
The radio uses the saved volume settings for each radio alarm when
it sounds.
20. Press and release the Tuning/Select control to confi rm the alarm
settings. 'SAVED' will show on the display before exiting the alarm
setup.
Radio alarms are indicated in the display by the
corresponding alarm number. Buzzer alarms are indicated by the
symbol and the corresponding alarm number.
symbol and the
14-20
22