Operating Your Radio - Fm Auto-Tune - Roberts eco 4 Bt User Manual

Operating your radio - FM auto-tune

1. Carefully fully extend the telescopic aerial located on the rear of your
radio.
2. Press and release the On/Off button to switch on your radio.
3. Press and release the Mode button until the FM mode is selected.
4. Press and hold the Tuning Up button for 2 seconds or rotate the Tuning
control clockwise and then press and release the Auto Tune button
to cause your radio to search from low frequency to high frequency
and to stop automatically when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio may display the station name.
6. To fi nd other stations press and hold the Tuning Up button for 2
seconds or press and release the Auto Tune button as before.
7. Press and hold the Tuning Down button for 2 seconds or rotate the
Tuning control anti-clockwise and then press and release the Auto
Tune button to cause your radio to search from high frequency to low
frequency and to stop automatically when it fi nds a station of suffi cient
strength.
8. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
9. Adjust the Volume, treble and bass to the required settings. To switch
off your radio, press and release the On/Off button.
2,9
Mode
3
4,6
7
4-7
4-7
9
9
9
14